Zenith C27F43 Installation And Operating Manual, Warranty - page 24
You can connect additional equipment, such as VCRs, camcorders etc. to your TV.
Connection panels shown here may be somewhat different from your TV.
Here is an example drawing of a typical jackpack layout.
1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select
VIDEO-1
.
2. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select
VIDEO-2
.
3. IN 3 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Use the TV/VIDEO button to select
VIDEO-3
.
4. OUT JACKS: Connect external equipment inputs (VCR, Audio amplifier) to these outputs for recording
or monitoring the selected program.
5.
§
/ EARPHONE JACK
Note: This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
External Equipment Connections
Connecting AUDIO/VIDEO IN Jacks
1. Connect the audio/video output jacks from the VCR
to IN 1 or IN 2 (A/V) jacks on the TV.
If you connect the video jack only, you can't hear the
sound from the TV.
2. Use the TV/VIDEO button to select
VIDEO-1
or
VIDEO-2
.
Note: If you connect the audio/video output jacks from
the VCR to the IN 3 (A/V) jacks on the side of
the TV, select
VIDEO-3
.
3. Press the PLAY button on the VCR.
The video playback appears on the TV screen.
Note: If using a monaural VCR, connect the output jack from VCR to the AUDIO L/MONO IN jack on TV
so that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack on
TV, the sound is heard only from the right speaker.
24
OUT
IN1
AUDIO
(L/MONO)
(R)
VIDEO
VIDEO
AUDIO
L/MONO
R
IN 3
TV
TV
Playback VCR
OUT
IN1
AUDIO
(L/MONO)
(R)
VIDEO
COMPONENT
DVD IN(480i)
Y
P
B
P
R
IN2
VIDEO
(L/MONO)
(R)
AUDIO
1
4
2
EARPHONE
VIDEO
AUDIO
S-VIDEO
L/MONO
R
IN 3
3
5