1. DL manuals
  2. Zenith
  3. Stereo System
  4. F-192
  5. Installation And Operating Manual

Zenith F-192 Installation And Operating Manual

Manual is about: Hi-Fi MICRO CD COMPONENT

Summary of F-192

  • Page 2

    Precautions 2 explanation graphical symbols: the lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclo- sure that may be of sufficient magnitude to constitute a risk of electric ...

  • Page 3

    Table of contents introduction 3 introduction precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 table of contents . . . . . . . . . . . . . . . . . . . . . . 3 important safety instructions. . . . . . . . . . . . . 4 before use . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    4 important safety instructions 1. Read these instructions. - all these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - the safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - all warni...

  • Page 5

    Introduction 5 before use safety precautions handling the unit when shipping the unit the original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. To keep the surface clean do not use volatile liquids, such as ...

  • Page 6

    6 front panel/ rear panel 1. Display 2. Preset (-) button 3. Counter reset button 4. Record/ record pause ( rec ) button 5. Tuner/ cd/ tape/ aux indicators 6. Power ( standby/on) button 7. Volume (-)/(+) knob 8. Cd sync. Button 9. Prog./ memory button 10. Headphone socket ( ): 3.5mm 11. Surround but...

  • Page 7

    Introduction 7 remote control x 2 3 4 5 6 7 9 10 11 12 13 1 8 1. Xdss button 2. Power button 3. Tuner/ band button 4. Aux button 5. Preset ( ) button 6. Cd function buttons • play/ pause ( ) button • cd stop( ) button • skip ( / ) button • fast rewind/ fast forward play ( / ) button • repeat button ...

  • Page 8

    8 connections speaker system connection connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). L l r r aux left speaker right speaker red ...

  • Page 9

    Before opera tion 9 11 press clock. (if the clock requires setting, press and hold clock for more than 2 seconds.) - the hours begin to flash. 2 2 select a 24 hour cycle or 12 hour cycle by pressing preset (-)/(+). 3 3 press set to confirm the selected hour cycle. 4 4 use preset (-)/(+) to set the c...

  • Page 10

    10 timer function 11 press clock to check the current time. 2 2 press “timer” to enter the timer setting mode. (if you want to correct the previous memorized timer setting, press and hold the “timer” but- ton more than 2 seconds.) the previous memorized timer on time and “timer” appears in the displ...

  • Page 11

    Before opera tion 11 audio adjustment volume adjustment • turn volume (-)/(+) knob clockwise to increase the sound level, or counterclockwise to decrease it. • press volume control ( ) to increase the sound level, or press the volume control ( ) to decrease it on the remote control. Sound quality ad...

  • Page 12

    12 presetting the radio stations you can preset 30 stations for fm and am. Before tuning, make sure that you have turned down the volume to the minimum. 11 press function repeatedly to appear tuner indicator (or tuner/band on the remote control). 2 2 press band to select the fm or am you want in the...

  • Page 13

    Opera tion 13 tape playback basic playback 11 press function repeatedly to appear tape indicator. (“no tape” appears in the display window.) 2 2 open cassette deck by pushing push eject position. 3 3 insert a cassette with the tape side to the bot- tom and then close deck. 4 4 press play . To stop p...

  • Page 14

    14 cd playback basic playback 11 press function repeatedly to appear cd indicator. If no disc is loaded then “no disc” is displayed. 2 2 press cd open( ) and place the disc into the disc tray. Note to load an 8cm(3 inch) disc, put it onto the inner circle of the tray. 3 3 press cd open( ) to close t...

  • Page 15

    Reference 15 troubleshooting check the following guide for the possible cause of a problem before contacting service. Symptom no power. No sound. The unit does not start playback. The remote control does not work properly. Cause • the power cord is disconnected. • the audio cables are not connected ...

  • Page 16

    P/no :3828r-a061b 16 specifications [general] [cd] [t uner] am fm (mw) [amp] [speakers] [t ape ] power supply refer to the back panel of the unit. Power consumption 30w mass 3.50kg external dimensions (wxhxd) 161 x 254 x 249.5mm frequency response 40 - 18000 hz signal-to-noise ratio 60 db dynamic ra...