Zenith F-192 Installation And Operating Manual - page 11
BEFORE OPERA
TION
11
Audio Adjustment
Volume Adjustment
• Turn VOLUME (-)/(+) knob clockwise to increase the
sound level, or counterclockwise to decrease it.
• Press VOLUME CONTROL (
) to increase the
sound level, or press the VOLUME CONTROL (
)
to decrease it on the remote control.
Sound Quality Adjustment
• To activate stereo sound
You can choose between 4 fixed sound impressions.
Select a desired sound mode by using the EQ.PATT
(EQ: on the remote control) button.
FLAT
: linear frequency response
ROCK
: more bass, more treble
POP
: less bass, less treble
CLASSIC : for orchestral music
• Headphone Socket
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
MUTE
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, “MUTE” indicator flashes in the display
window.
SURROUND
To activate surround mode
You can choose between 3 fixed sound impressions.
Select a desired surround mode by using SURROUND.
SURROUND 1 ON
→ SURROUND 2 ON→ SURROUND OFF
XDSS (Extreme Dynamic Sound System)
Press XDSS to reinforce treble, bass and surround
effect.
The “XDSS ON” or “XDSS OFF” indicator lights up.
To cancel it press XDSS again.
Auxiliary Function
11
Connect an auxiliary device i.e. TV or VCR, via the rear mounted AUX phone sockets.
2
2
Press AUX.
Note
You can also record from the auxiliary input source, see
Recording Section.