Zenith IQC50H94 Technical Training Manual - Service Menus
Manual is about: 2000 C-Line Projection TV
of
98
8
SERVICE MENUS
Service Menu Access
To access the service menu on the ZP94/95 series;
1. Press and hold the SOURCE button on the user control panel at the front of the set.
2. While holding the SOURCE button, press the POWER button on the user control panel at the front of
the set to activate the service menu.
3. Receive signal on main picture.
4. Check the service menu items according to the following tables, using the up and down buttons on
Remote Control.
5. Press MENU key to exit service menu adjustment mode.
NOTE:
1. If there is a different value than shown in table above, for fixed data, adjust it using buttons (only
in this case).
2. When exchanging microprocessor and TV is turned on for first time, it requires initialization of
VIDEO CHROMA ADJ on P1 to P6.