2gig Technologies GC2 User Manual - page 38
System Toolbox
Copyright © 2016 Nortek Security & Control 35
4
At the System Test Successful screen, tap
OK.
Telephone Test
If your security system is connected to your
telephone line it can communicate with the
Central Station using your telephone line.
Your system can send its alarm messages and
system trouble or status messages using the
land‐based telephone system. You can also
use the telephone connection for any 2‐way
audio communications with the Central
Station.
IMPORTANT: Test your Security System
weekly to ensure continued protection
and proper system operation.
You can test the telephone connection using
the Toolbox.
1
At the Home screen, tap Security.
2
At the Security screen, tap Menu.
3
At the Menu screen, tap Toolbox.
4
Enter the master user code to gain
access to the Toolbox.
5
Use the ← and → arrows to select
Toolbox (3 of 3) screen.
6
On the Toolbox (3 of 3) screen, tap
Telephone Test.
7
To begin the test enter the master user
code again.
The system displays the Telephone Test
Status screen. The top part of the screen
shows each function that is being tested.
8
Use the ↑ and ↓ arrows to scroll
through the status messages. The
bottom part of the screen shows the
results of each test.
9
If any tests fail, note what messages
were displayed, and contact your alarm
installer to troubleshoot your system.
10
After the testing is complete, tap Ok to
return to the Toolbox.
Cell Phone Test
If your security system is equipped with a
built in cellular radio, it can use it to send
alarm messages and system trouble or status
messages to the Central Station. You can also
use the system’s cellular radio for any 2‐way
audio communications with the Central
Station.
IMPORTANT: Test your Security System
weekly to ensure continued protection
and proper system operation.
You can test the cellular radio connection
using the Toolbox.
1
At the Home screen, tap Security.
2
At the Security screen, tap Menu.
3
At the Menu screen, tap Toolbox.
4
Enter the master user code to gain
access to the Toolbox.
5
Navigate to the Toolbox (3 of 3) screen
using the ← and → arrows.
6
At the Toolbox screen (3 of 3), tap Cell
Phone Test.
7
To begin the test enter the master user
code again.