2N EasyRoute Quick Setup Manual - page 3
2N
®
EasyRoute
3
RESET BUTTON
Reset button pressed for short period of time restarts the 2N®EasyRoute. Pressed for more than
10sec reset all set to default values.
UMTS / GSM network
The speed and quality of connection depends on UMTS / GSM operator, accessible services, signal
coverage and status of network. Technical parameters are maximal, for detailed information about
accessible service contact your mobile operator.
Connection diagram of 2N®EasyRoute
Indication LED table:
Power supply
• Blued led diode: power on
Network
• Yellow led diode – UMTS/GSM status
• Green led– Wi-Fi status
• Flashes – network active
• Length of flash – traffic indication
Phone line
• no light = standby
• flashes quickly = line off-hook or ringing
• light = call
Power adapter
INPUT
: 110V/240V AC
OUTPUT
: 12V/2A DC
Analogue
phone
-Option to connect up to 4 PC / Laptops through Ethernet / UTP wire
Ethernet /
UTP wire
Wireless connection
for PC or Laptops
through inbuilt WiFi
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299