1. DL manuals
  2. 2N
  3. Intercom System
  4. Helios IP Force
  5. Installation Manual

2N Helios IP Force Installation Manual

Other manuals for Helios IP Force: Installation Manual, Installation Manual
Manual is about: Security IP Intercom

Summary of Helios IP Force

  • Page 1

    Www.2n.Cz 2n helios ip force ® security ip intercom installation manual version: 2.7.

  • Page 2

    The 2n telekomunikace a.S. Is a czech manufacturer and supplier of telecommunications equipment. The product family developed by 2n telekomunikace a.S. Includes gsm gateways, private branch exchanges (pbx), and door and lift communicators. 2n telekomunikace a.S. Has been ranked among the czech top c...

  • Page 3

    The 2n telekomunikace a.S. Is the holder of the iso 9001:2009 certificate. All development, production and distribution processes of the company are managed by this standard and guarantee a high quality, technical level and professional aspect of all our products..

  • Page 4

    2n telekomunikace a.S., www.2n.Cz 4/110 content: 1. Product overview 1.1 components and associated products 1.2 terms and symbols 2. Description and installation 2.1 before you start 2.2 mechanical installation 2.3 electric installation 2.4 extending module connection 2.5 button tags 3. Function and...

  • Page 5

    2n telekomunikace a.S., www.2n.Cz 5/110 1. Product overview here is what you can find in this section: 1.1 components and associated products 1.2 terms and symbols basic features 2n helios ip force ® is a highly resistant and reliable ip door access intercom provided with a lot of useful above-stand...

  • Page 6

    2n telekomunikace a.S., www.2n.Cz 6/110 2n helios ip force ® is equipped with an electric lock switch. You can control the switch using a numerical keypad or, during a call, using any telephone set. An additional switch module can be installed if necessary. A wide range of settings allow for a varie...

  • Page 7

    2n telekomunikace a.S., www.2n.Cz 7/110 tftp client for automatic configuration and firmware update.

  • Page 8

    2n telekomunikace a.S., www.2n.Cz 8/110 1.1 components and associated products 2n helios ip force ® components and associated products:.

  • Page 9

    2n telekomunikace a.S., www.2n.Cz 9/110 basic units one-button part no. 9151101 1 button control of two electric locks possibility of connecting additional switch part no. 9151101c 1 button camera control of two electric locks possibility of connecting additional switch part no. 9151101ch 1 button h...

  • Page 10

    2n telekomunikace a.S., www.2n.Cz 10/110 one-button part no. 9151101w 1 button control of two electric locks possibility of connecting additional switch 10 w loudspeaker, ip69k part no. 9151101cw ip69k 1 button camera 10 w loudspeaker, ip69k extra robust version control of two electric locks possibi...

  • Page 11

    2n telekomunikace a.S., www.2n.Cz 11/110 one-button part no. 915101rp 1 button, pictograms, possibility of connecting card reader control of two electric locks possibility of connecting additional switch part no. 9151101crp 1 button, pictograms, with camera, possibility of connecting card reader con...

  • Page 12

    2n telekomunikace a.S., www.2n.Cz 12/110 one-button part no. 915101rpw 1 button, pictograms, possibility of connecting card reader control of two electric locks possibility of connecting additional switch 10 w loudspeaker, ip69k part no. 9151101crpw 1 button, pictograms with camera possibility of co...

  • Page 13

    2n telekomunikace a.S., www.2n.Cz 13/110 one-button part no. 9151101k 1 button keypad control of two electric locks possibility of connecting additional switch part no. 9151101ck 1 button keypad camera control of two electric locks possibility of connecting additional switch part no. 9151101chk 1 bu...

  • Page 14

    2n telekomunikace a.S., www.2n.Cz 14/110 one-button part no. 9151101kw 10 w loudspeaker, ip69k 1 button keypad control of two electric locks possibility of connecting additional switch part no. 9151101ckw 10 w loudspeaker, ip69k 1 button keypad camera control of two electric locks possibility of con...

  • Page 15

    2n telekomunikace a.S., www.2n.Cz 15/110 two-button part no. 9151102r 2 buttons possibility of connecting card reader control of two electric locks possibility of connecting additional switch part no. 9151102cr 2 buttons camera possibility of connecting card reader control of two electric locks poss...

  • Page 16

    2n telekomunikace a.S., www.2n.Cz 16/110 two-button part no. 9151102chrw 2 buttons hd camera possibility of connecting card reader control of two electric locks possibility of connecting additional switch 10 w loudspeaker, ip69k part no. 9151102crw 2 buttons camera possibility of connecting card rea...

  • Page 17

    2n telekomunikace a.S., www.2n.Cz 17/110 two-button part no. 9151102-x1 2 buttons 10w loudspeaker, ip69k 2 buttons with „info“ and „sos“ labels anti-vandal buttons made of stainless steel note: customization available per request.

  • Page 18

    2n telekomunikace a.S., www.2n.Cz 18/110 four-button part no. 9151104 4 buttons control of two electric locks possibility of connecting additional switch part no. 9151104c 4 buttons camera control of two electric locks possibility of connecting additional switch part no. 9151104ch 4 buttons hd camer...

  • Page 19

    2n telekomunikace a.S., www.2n.Cz 19/110 four-button part no. 9151104w 10 w loudspeaker, ip69k 4 buttons control of two electric locks possibility of connecting additional switch part no. 9151104cw 10 w loudspeaker, ip69k 4 buttons camera control of two electric locks possibility of connecting addit...

  • Page 20

    2n telekomunikace a.S., www.2n.Cz 20/110 2n helios ip force ® is designed for outdoor applications and requires no additional roof. W-including part nos. Are intended for wap pressure cleaning and extremely noisy environments (such as highways, etc.). 2n helios ip force ® units can be flush or wall ...

  • Page 21

    2n telekomunikace a.S., www.2n.Cz 21/110 flush mounting box 9151001 part no. Brick flush mounting box dimension: 132 x 223 x 83 mm 9151002 part no. Plasterboard flush mounting box dimension: 237 x 129 x 70 mm hole: 237 x 118 mm part no. 9151018 security screws an alternative that is safer than regul...

  • Page 22

    2n telekomunikace a.S., www.2n.Cz 22/110 internal units part numbers: 91378365 91378366 2n indoor touch ® - black wifi version (second part no.) the elegant internal touch panel, , is suitable 2n indoor touch ® for all intercoms. On the panel’s display not only 2n helios ip can you find out who is a...

  • Page 23

    2n telekomunikace a.S., www.2n.Cz 23/110 voip telephones 91378357 part no. Grandstream gxv3240 voip video telephone gxv3240 is the successor to the popular gxv3140 model, which allows comfortable video calls in the ip network. Touchscreen and keyboard control. 91378358 part no. Grandstream gxv3275 v...

  • Page 24

    2n telekomunikace a.S., www.2n.Cz 24/110 electric locks 932071e part no. Befo 11211 12v/230ma dc low consumption 932081e part no. Befo 11221 with momentum pin 12v/230ma dc low consumption for opening of the lock a short electrical impuls is sufficient, which unlocks the lock. Lock is then open until...

  • Page 25

    2n telekomunikace a.S., www.2n.Cz 25/110 part no. 932061e 211211 door signalling, low consumption 12v / 230ma a regular lock with a built-in contact to indicate whether the door is open or closed. Part no. 932072e 31211 fail-safe 12v / 170ma dc the failsafe lock is closed when electricity is switche...

  • Page 26

    2n telekomunikace a.S., www.2n.Cz 26/110 power supply part numbers: 91378100 91378100e 91378100us poe injector - without cable poe injetor - with eu cable poe injector - with us cable for power supply of intercom via ethernet cable when poe switch is not available. 91341481e part no. Stabilised 12 v...

  • Page 27

    2n telekomunikace a.S., www.2n.Cz 27/110 additional modules 9151010 part no. Additional switch with normally open/closed contact and 12 v switched output. Includes tamper switch. Enables control of a secondary device, passive time unlimited switching up to 48 v / 2 a or active switch 12 v / 700 ma. ...

  • Page 28

    2n telekomunikace a.S., www.2n.Cz 28/110 9151017 part no. Internal rfid card reader 13.56 mhz nfc ready for mounting. 2n helios ip force ® two switches, two logical inputs and a wiegand interface are available. It is compatible with the 2n helios ip force ® two-button and pictogram models. It also i...

  • Page 29

    2n telekomunikace a.S., www.2n.Cz 29/110 part no. 9159010 2n helios ip ® security relay a handy add-on that significantly enhances door entry security as it prevents tampering with the intercom and forced opening of the lock. To be installed between intercom and lock, powered by the intercom. 915901...

  • Page 30

    2n telekomunikace a.S., www.2n.Cz 30/110 9134165e part no. Rfid card, 125 khz em4100 9134166e part no. Rfid key fob, 125 khz 9134173 part no. Mifare rfid card, 13.56 mhz part no. 9159050 2n induction loop ® an induction loop transmits sound wirelessly from the intercom to the 2n helios ip earphones ...

  • Page 31

    2n telekomunikace a.S., www.2n.Cz 31/110 part no. 9159052 power supply for 2n induction loop ® external power supply for the induction loop. Input 230v ac output 12v dc part no. 9134174 mifare rfid card, 13.56 mhz part no. 9159014eu/us/uk 2n 2wire ® (set of 2 adaptors and power source for eu/us /uk)...

  • Page 32

    2n telekomunikace a.S., www.2n.Cz 32/110 part no. 9159013 exit button (suitable for internal rfid card reader or security relay) a button for connection to a logic input for opening a door inside a building. Part no. 9159012 magnetic door contact (suitable for internal rfid card reader) set for inst...

  • Page 33

    2n telekomunikace a.S., www.2n.Cz 33/110 part no. 9159031 external 13.56mhz mifare rfid card reader, wiegand secondary reader for connection to an internal reader. Allows control of card entry from both sides of the door. Ip68 cover, also suitable for exteriors. Reads mifare cards. Part no. 9154004 ...

  • Page 34

    2n telekomunikace a.S., www.2n.Cz 34/110 part no. 9137421e ext. Rfid reader 13.56mhz + 125khz (usb interface) external rfid card reader for connection to pc using a usb interface. Suitable for system administration and adding 13.56mhzand 125khz cards using a web interface or the2n ® application. It ...

  • Page 35

    2n telekomunikace a.S., www.2n.Cz 35/110 1.2 terms and symbols the following symbols and pictograms are used in the manual: safety always abide by this information to prevent persons from injury. Warning always abide by this information to prevent damage to the device. Caution important information ...

  • Page 36

    2n telekomunikace a.S., www.2n.Cz 36/110 2. Description and installation here is what you can find in this section: 2.1 before you start 2.2 mechanical installation 2.3 electric installation 2.4 extending module connection 2.5 button tags.

  • Page 37

    2n telekomunikace a.S., www.2n.Cz 37/110 product completeness check before you start please check the contents of your delivery: 2n helios ip force ® 1× 2n helios ip force ® 1× frame (of the corresponding colour) 1× torx 10 / torx 20 double-ended wrench bushings (enclosed): 1× big two-hole sealed bu...

  • Page 38

    2n telekomunikace a.S., www.2n.Cz 38/110 2.2 mechanical installation content common mounting principles flush mounting - classic bricks flush mounting - thermally insulated wall flush mounting - plasterboard flush mounting - hollow bricks wall mounting use of cable bushings common mounting principle...

  • Page 39

    2n telekomunikace a.S., www.2n.Cz 39/110 caution make sure that the dowel holes have the required diameter. If the diameter is too large, the dowels may get loose. Use some suitable building adhesive to keep the dowels in place. Make sure that the hole depth is sufficient too! The dowel length is 50...

  • Page 40

    2n telekomunikace a.S., www.2n.Cz 40/110 note the microphone sound guides are normally loose after the front panel is removed! The screw is only used as a fall-out protection during installation. Warning be sure keep strictly the hole dimensions while mounting the device into classic bricks without ...

  • Page 41

    2n telekomunikace a.S., www.2n.Cz 41/110 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. If you use the brick flush mounting box, follow the instructions included in the box. If you do not use the mounting box, follow the instructions below: make a hole using the template. Suppose that all the required cables have b...

  • Page 42

    2n telekomunikace a.S., www.2n.Cz 42/110

  • Page 43

    2n telekomunikace a.S., www.2n.Cz 43/110

  • Page 44

    2n telekomunikace a.S., www.2n.Cz 44/110 flush mounting – thermally insulated wall what you need: longer screws (depending on the thermal insulation thickness) hole: (112 × 220 × 70) mm cut out the thermal insulation layer using the template (the same as for classic brick wall). Caution the hole dep...

  • Page 45

    2n telekomunikace a.S., www.2n.Cz 45/110 flush mounting – plasterboard use the plasterboard flush mounting box and follow the instructions included therein. What you need: plasterboard flush mounting box, part no. 9151002 hole: 118 × 237mm flush mounting – hollow bricks what you need: brick flush mo...

  • Page 46

    2n telekomunikace a.S., www.2n.Cz 46/110 wall mounting what you need: just your unit 2n helios ip force ® wall (surface) mounting is used where flush mounting is inapplicable (in concrete and steel structures, entry barrier columns, etc.). The frame is not used..

  • Page 47

    2n telekomunikace a.S., www.2n.Cz 47/110 1. 2. 3. 4. 5. 6. Caution wall mounting may be a problem where vandals may destroy the unit (in public garages, e.G.). Therefore, use steel fixing elements instead of the dowels and screws included in the delivery. Be sure to insert plugs into unused bushing ...

  • Page 48

    2n telekomunikace a.S., www.2n.Cz 48/110 use of cable bushings the cable bushings included in the delivery are designed for the 2n helios ip force ® following cables: big bushing: for two cables of the diameter of 5–6 mm (utp cable), or, upon insert replacement, for one thick cable/tube of the diame...

  • Page 49

    2n telekomunikace a.S., www.2n.Cz 49/110 tip even a lan cable including the rj-45 connector can go through the big bushing. See below for instructions. How to pull a rj-45 terminated cable through a bushing 1. Unscrew the big bushing nut completely. 2. Remove the sealing including the cover from the...

  • Page 50

    2n telekomunikace a.S., www.2n.Cz 50/110 4. Replace the cover onto the sealing. 5. Pull the cable connector though the bushing body into the intercom and clip it into the motherboard connector. 6. Move the sealing including the cover along the cable as far as the bushing body, or add a plug if neces...

  • Page 51

    2n telekomunikace a.S., www.2n.Cz 51/110 2.3 electric installation this subsection describes how to connect into your local area 2n helios ip force ® network (lan) and how to connect supply voltage and the electric lock. Pcb connectors lan connection external power supply connection electric lock co...

  • Page 52

    2n telekomunikace a.S., www.2n.Cz 52/110 x17 – relay no and nc contact max. 30 v / 1 a ac/dc x18 – switched output 9 up to 13 v dc depending on power supply (poe: 9 v; adaptor: power supply voltage minus 1 v), max 700 ma x19 – power input 12 v ±15 % / 2 a dc led1/2 – system status indicators led3 – ...

  • Page 53

    2n telekomunikace a.S., www.2n.Cz 53/110 2n helios ip force ® connectors, pcb version 555v3.

  • Page 54

    2n telekomunikace a.S., www.2n.Cz 54/110 2n helios ip force ® connectors, pcb version 555v4 lan connection 2n helios ip force ® is connected to the lan via a rj-45 terminated (connector x11) utp/stp cable (of category cat 5e or higher). The system is equipped with the auto- mdix function and so both...

  • Page 55

    2n telekomunikace a.S., www.2n.Cz 55/110 external power supply connection 2n helios ip force ® can be fed either from an external 12 v ±15 % / 2 a dc power supply or from the lan equipped with the poe 802.3af supporting network elements. External power supply an external 12 v power supply is connect...

  • Page 56

    2n telekomunikace a.S., www.2n.Cz 56/110 1. 2. 3. 4. 5. 6. Warning when you connect a device containing a coil, such as a relay or an electromagnetic lock, it is necessary to protect the intercom against voltage peak while switching off the induction load. For this way of protection we recommend a d...

  • Page 57

    2n telekomunikace a.S., www.2n.Cz 57/110 normal operation default setup configuration jumpers x6, pcb version 555v2 grounding we recommend to ground the intercom in order to improve the static electricity resistance. For proper grounding you need a cable of the minimum cross-section of 4 mm2. Connec...

  • Page 58

    2n telekomunikace a.S., www.2n.Cz 58/110 1. 2. Mounting completion having connected all the wires, make sure that the bushings, if used, are tightened properly and the rj-45 connector is inserted in the pcb connector. Replace the front cover carefully. Make sure that the connector is inserted correc...

  • Page 59

    2n telekomunikace a.S., www.2n.Cz 59/110 location name description internal rfid card reader 125 * khz (part no. 9151011) output 1 (card reader) active switch output : 9 up to 13 v dc depending on power supply (poe: 9 v; adaptor: power supply voltage minus 1 v), max 700 ma internal rfid card reader ...

  • Page 60

    2n telekomunikace a.S., www.2n.Cz 60/110 2.4 extending module connection 2n helios ip force ® allows to connect following extending modules: additional switch internal rfid card reader 125 khz internal rfid card reader 13.56 mhz internal secured rfid card reader 13.56 mhz security relay wiegand isol...

  • Page 61

    2n telekomunikace a.S., www.2n.Cz 61/110 1. 2. 3. A. B. C. 4. 5. 6. 7. A. B. C. 8. Specifications: passive switch: no and nc contacts, up to 30 v / 1 a ac/dc active switch output: 9 v (using poe) or power supply voltage minus 1 v, from 9 to 13 v max. 700 ma dc tamper switch: 24 v / 50 ma ac/dc modul...

  • Page 62

    2n telekomunikace a.S., www.2n.Cz 62/110 8. 9. If you want to use the tamper switch, insert the tamper board (9) in the connector located in the right-hand bottom part of the switch board (4). As the tamper switch shares the relay output (no and nc) terminals, you cannot use the relay2 output with t...

  • Page 63

    2n telekomunikace a.S., www.2n.Cz 63/110

  • Page 64

    2n telekomunikace a.S., www.2n.Cz 64/110 module settings: refer to the configuration manual for details. Connection: internal rfid card reader 125 khz the (part no. 9151011) is used for reading rfid card internal rfid card reader 125 khz ids in the 125 khz band. This module is intended for mounting ...

  • Page 65

    2n telekomunikace a.S., www.2n.Cz 65/110 the purpose of the tamper switch is to signal any unauthorised opening of the intercom (to prevent a theft, e.G.). It is recommended to use the tamper switch. Tip faq: tamper switch - how to install it into the 2n helios ip force ® specifications: card reader...

  • Page 66

    2n telekomunikace a.S., www.2n.Cz 66/110 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Signalling output internal red led under reader window wiegand interface off/input/output (as programmed) mounting guide: switch off the intercom. Remove the front panel (7) from the intercom. Mount antenna board...

  • Page 67

    2n telekomunikace a.S., www.2n.Cz 67/110

  • Page 68

    2n telekomunikace a.S., www.2n.Cz 68/110 module setting: refer to the configuration manual for details of wiegand, outputs and reader. Refer to the automation manual for details of input, red led and tamper function and use. Connection:.

  • Page 69

    2n telekomunikace a.S., www.2n.Cz 69/110 internal rfid card reader 13.56 mhz the (part no. 9151016) is used for reading rfid internal rfid card reader 13.56 mhz card ids in the 13.56 mhz band. This module is intended for mounting into the 2n ® model 9151102cr, 9151102r, 9151101crp and 9151101rp. The...

  • Page 70

    2n telekomunikace a.S., www.2n.Cz 70/110 iso/iec 18092 smartphone with nfc/hce support, since android version 4.3 relay output switching contact 30 v / 2a ac/dc active output 9 to 12 v / 700 ma transistor switched output. Depends on power supply (poe: 9 v or power supply voltage minus 1 v). Logical ...

  • Page 71

    2n telekomunikace a.S., www.2n.Cz 71/110 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Mounting guide: switch off the intercom. Remove the front panel (7) from the intercom. Mount antenna board (8). Use two enclosed self tapping screws (9). Plug enclosed cable (11) to the antenna board connector. D...

  • Page 72

    2n telekomunikace a.S., www.2n.Cz 72/110

  • Page 73

    2n telekomunikace a.S., www.2n.Cz 73/110 module setting: refer to the configuration manual for details of wiegand, outputs and reader. Refer to the automation manual for details of input, red led and tamper function and use. Connection:.

  • Page 74

    2n telekomunikace a.S., www.2n.Cz 74/110 internal secured rfid card reader 13.56 mhz the (part no. 9151019) is used for reading rfid internal rfid card reader 13.56 mhz card ids in the 13.56 mhz band. This module is intended for mounting into the 2n ® model 9151102cr, 9151102r, 9151101crp and 915110...

  • Page 75

    2n telekomunikace a.S., www.2n.Cz 75/110 iso/iec 18092 smartphone with nfc/hce support, since android version 4.3 relay output switching contact 30 v / 2a ac/dc active output 9 to 12 v / 700 ma transistor switched output. Depends on power supply (poe: 9 v or power supply voltage minus 1 v). Logical ...

  • Page 76

    2n telekomunikace a.S., www.2n.Cz 76/110 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Mounting guide: switch off the intercom. Remove the front panel (7) from the intercom. Mount antenna board (8). Use two enclosed self tapping screws (9). Plug enclosed cable (11) to the antenna board connector. D...

  • Page 77

    2n telekomunikace a.S., www.2n.Cz 77/110

  • Page 78

    2n telekomunikace a.S., www.2n.Cz 78/110 module setting: refer to the configuration manual for details of wiegand, outputs and reader. Refer to the automation manual for details of input, red led and tamper function and use. Connection:.

  • Page 79

    2n telekomunikace a.S., www.2n.Cz 79/110 security relay the (part no. 9159010) is used for enhancing security 2n helios ip ® security relay between the intercom and the connected electric lock. The 2n helios ip security ® is designed for any intercom model with firmware versions 1.15 and relay 2n he...

  • Page 80

    2n telekomunikace a.S., www.2n.Cz 80/110 connection: connect the to the intercom as follows: 2n helios ip security relay ® to the intercom active output (out1 or out2) , or to the intercom relay output with a 12 v dc serial external power supply. Connect the electric lock to the output as follows: 2...

  • Page 81

    2n telekomunikace a.S., www.2n.Cz 81/110 activate the intercom switch using the keypad, telephone, etc. The first code sent from the intercom will be stored in the memory and considered valid. After code initialisation, the will pass into the operational 2n helios ip security relay ® mode (the green...

  • Page 82

    2n telekomunikace a.S., www.2n.Cz 82/110 the is designed for galvanic isolation of two devices 2n helios ip wiegand isolator ® with separate power supply and interconnected via the wiegand bus. The 2n helios ® protects the interconnected devices against communication ip wiegand isolator errors and/o...

  • Page 83

    2n telekomunikace a.S., www.2n.Cz 83/110 connection:.

  • Page 84

    2n telekomunikace a.S., www.2n.Cz 84/110 induction loop 2n induction loop ® (part no. 9159050 – induction loop amplifier for 2n helios intercom, part no. 9159054 – induction loop amplifier without helios accessory, part no. 9159051 – external induction loop for wall mounting, part no. 9159052 - 12 v...

  • Page 85

    2n telekomunikace a.S., www.2n.Cz 85/110 specifications: supply voltage: 8 – 18vdc supply current at 12 v supply: standby; up to 10 ma no signal; 100 ma 8 Ω load, half power output; 550 ma, sine wave signal; 400 ma, pink noise signal 1 Ω load, full power output; 1.4 a, sine wave signal; 1 a, pink no...

  • Page 86

    2n telekomunikace a.S., www.2n.Cz 86/110 temperature range: -20 - +50 °c covering: ip65 (with round cable of 5 - 10 mm diameter) dimensions: 144 x 100 x 31 mm weight: 0.3 kg.

  • Page 87

    2n telekomunikace a.S., www.2n.Cz 87/110 1. 2. 2.5 button tags tag printing every delivery includes a sheet of translucent foil, which can 2n helios ip force ® be laser-printed. Cut the printed foil and insert the tags in the name plates. Every name plate includes a piece of foil, which can be writt...

  • Page 88

    2n telekomunikace a.S., www.2n.Cz 88/110 1. 2. 3. 4. Tag inserting/replacing instructions 2n helios ip force ® provides an intuitive, easy access to the name plates. The tags are easy to insert and replace even without a manual. You need not remove the front panel and thus are not exposed to the ris...

  • Page 89

    2n telekomunikace a.S., www.2n.Cz 89/110 3. Function and use in this section we describe the basic and extending functions of the 2n helios ip ® product. Force here is what you can find in this section: 3.1 configuration 3.2 control 3.3 maintenance 3.4 downloads.

  • Page 90

    2n telekomunikace a.S., www.2n.Cz 90/110 3.1 configuration use a pc equipped with any web browser to configure : 2n helios ip force ® launch your web browser (internet explorer, firefox, etc.). Enter the ip address of your intercom ( , e.G.). Http://192.168.1.100/ log in using the user name and pass...

  • Page 91

    2n telekomunikace a.S., www.2n.Cz 91/110 note be sure to press the button sequence within thirty seconds after the sound signal for security reasons. Up to 2 s intervals are allowed between the presses. Static ip address setting for 4-button models follow the instructions below to enable the static ...

  • Page 92

    2n telekomunikace a.S., www.2n.Cz 92/110 the acoustic signal indicates mode switching. Wait until the device is restarted automatically. Caution the 1, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the first sound signal for security reasons. The inter-digit delay may be 2 s at most...

  • Page 93

    2n telekomunikace a.S., www.2n.Cz 93/110 caution the 2, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the first sound signal for security reasons. The inter-digit delay may be 2 s at most . 2n helios ip force ® gets the ip address upon restart only if the dhcp server is configured p...

  • Page 94

    2n telekomunikace a.S., www.2n.Cz 94/110 caution the 15 times 1 sequence must be entered within 30 seconds after the first sound signal for security reasons. The inter-digit delay may be 2 s at most. The static ip address mode will be switched into the dynamic ip address mode and vice versa upon res...

  • Page 95

    2n telekomunikace a.S., www.2n.Cz 95/110 1. 2. 3. 3.2 control this subsection describes how to control when viewed by an 2n helios ip force ® external user. Speed dial buttons press the speed dial buttons on the basic unit to make quick dialling for the first 1, 2 or 4 positions (depending on the mo...

  • Page 96

    2n telekomunikace a.S., www.2n.Cz 96/110 3. 4. Enter the telephone number using the numerical keypad and repress for confirmation. You can also push the button anytime to terminate a call if enabled so in the parameter; refer to the miscellaneous subsection. Hang up with # answering and rejecting in...

  • Page 97

    2n telekomunikace a.S., www.2n.Cz 97/110 3.3 maintenance cleaning if used frequenly, the device surface, the keypad in particular, gets dirty. To clean it, use a piece of soft cloth moistened with clean water. We recommend you to follow these principles while cleaning: never use aggressive detergent...

  • Page 98

    2n telekomunikace a.S., www.2n.Cz 98/110 future tag replacement, programming changes for necessary steps refer to the preceding subsections. Keep the following for future changes: this manual unused transparent foil strips for button tags caution always use the product for the purpose it was designe...

  • Page 99

    2n telekomunikace a.S., www.2n.Cz 99/110 3.4 downloads templates nametags software 2n helios ip usb driver 1.0.6 ® 2n helios ip eye 1.1.4.0.19 ® 2n helios ip network scanner 3.0.4 ®.

  • Page 100

    2n telekomunikace a.S., www.2n.Cz 100/110 4. Technical parameters signalling protocol sip (udp, tcp, tls) buttons button design: transparent, white backlit buttons with easily replaceable name tags count of buttons: 1, 2 or 4 numerical keypad: optional audio microphone: 2 integrated microphones ampl...

  • Page 101

    2n telekomunikace a.S., www.2n.Cz 101/110 infrared light: yes focal length: 1.1 mm focal length hd version: 2.3 mm camera hd sensor: 1/3'' colour cmos jpeg resolution: up to 1280 (h) x 960 (v) video resolution: 640 (h) × 480 (v) frame rate: up to 30 snapshots/s sensor sensitivity: 5.6 v/lux-sec (550...

  • Page 102

    2n telekomunikace a.S., www.2n.Cz 102/110 codecs: h.263, h.263+, h.264, mpeg-4, m-jpeg ip camera function: yes interface power supply: 12 v ±15 % / 2 a dc or poe poe: poe 802.3af (class 0 - 12.95 w) lan: 10/100base-tx s auto-mdix, rj-45 recommended cabling: cat-5e or higher passive relay switch: no ...

  • Page 103

    2n telekomunikace a.S., www.2n.Cz 103/110 iso/iec 14443a mifare classic 1k & 4k, desfire ev1, mini, plus s&x, ultralight, ultralight c iso/iec 14443b cepas, hid iclass jis x 6319 felica iso/iec 18092 smartphone with nfc/hce support, since android version 4.3 wiegand interface: input/output mode, loc...

  • Page 104

    2n telekomunikace a.S., www.2n.Cz 104/110 5. Supplementary information here is what you can find in this section: 5.1 troubleshooting 5.2 directives, laws and regulations 5.3 general instructions and cautions.

  • Page 105

    2n telekomunikace a.S., www.2n.Cz 105/110 5.1 troubleshooting for the most frequently asked questions refer to . Faq.2n.Cz.

  • Page 106

    2n telekomunikace a.S., www.2n.Cz 106/110 5.2 directives, laws and regulations europe 2n helios ip force ® conforms to the following directives and regulations: directive 1999/5/ec of the european parliament and of the council, of 9 march 1999 - on radio equipment and telecommunications terminal equ...

  • Page 107

    2n telekomunikace a.S., www.2n.Cz 107/110 this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ...

  • Page 108

    2n telekomunikace a.S., www.2n.Cz 108/110 5.3 general instructions and cautions please read this user manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may resu...

  • Page 109

    2n telekomunikace a.S., www.2n.Cz 109/110 the consumer shall, without delay, change the access password for the product after installation. The manufacturer shall not be held liable or responsible for any damage incurred by the consumer in connection with the use of the original password. The manufa...

  • Page 110

    2n telekomunikace a.S., www.2n.Cz 110/110 2n telekomunikace a.S. Modřanská 621, 143 01 prague 4, czech republic phone: +420 261 301 500, fax: +420 261 301 599 e-mail: sales@2n.Cz web: www.2n.Cz v2.7.