2N OfficeRoute Quick Manual - page 2
2N OfficeRoute
Basic settings
Connection of OfficeRoute
OfficeRoute has default IP address 10.0.0.1 and mask 255.0.0.0. You can
reach OfficeRoute’s web interface in case that you assign IP address of your
PC from the same range as IP of OfficeRoute.
In case you want to change IP address of OfficeRoute as a first step, you can
use supplied USB cable (it is necessary to install USB driver). Run
Hyperterminal (or another terminal program enabling serial communication),
select COM port assigned to installed USB driver, Set communication speed
921600 bps, flow control:none. When you press Enter, following screen
appears:
2N OfficeRoute V1.01 Main Menu 2N OfficeRoute
Option Value Description
1 – Configuration [ menu ] – General configuration
2 – Set Admin password – Set administration password
3 – Help – Display help for serial
console settings
Enter an option number,
>
Select: 1-Configuration, 1-Network settings, you can set IP address, mask
and other network settings.
WARNING: Assigned IP address must not be the same as already existing IP
address in your network.