3Com 005699-00 - Installation Manual - page 5
Connect the modem to an
analog phone line.
en you are not using the modem, you can use a
phone on the modem’s phone line. Plug the
phone’s cord into the modem’s jack labeled
.
g one end of the provided phone cord into the
on the modem labeled
and plug the other
into an analog phone wall jack.
Driver Wizard” screen appears, insert your drive
into your 3.5-inch drive and insert your driver disk
your 3.5-inch drive and click
.
Click
. When the “Insert Disk”
appears, make sure you have the driver
inserted into the computer’s 3.5-inch
driv
. When the “Copying Files”
appears, type A:\ in the box and click
If you have Windows 98:
Turn your computer on. When the “Add New H
Wizard” screen appears, insert your driver diskette
3.5-inch drive and click
. Select Search
best driver for your device and click
Floppy disk drives. If the location of your 3.5-inc
not A:\ change it on the bottom section of this scr
. You will be prompted to repeat this
to install the voice driver files.
If you have Windows NT:
Turn your computer on. Insert your driver diskette
3.5-inch drive before you log in. Double-click
Computer icon. Double-click your a:\ drive icon.
click Setup .exe. When the “Modem Setup” screen
click Install. When you see the Resources tab
see the COM port that is assigned to your mod
. When the “System Settings Change”
appears, click Yes to restart your computer.