3Com 005699-00 - Installation Manual - page 6
Insert the Connections
CD into your CD-ROM drive. The
CD’s installation utility should start automatically. If it
does not, click
and then click
. In the
box, type D:\setup.exe and then click
. If your
CD-ROM drive uses a different letter, type that letter in
place of “D.”
The Setup Wizard on the CD guides you through
installing the Connections program group and
registering your modem.
For instructions on how to install software from the CD,
see the “Software Installation” chapter in the electronic
User’s Guide & Reference on the CD.
6
Install the Connections
TM
CD and
register your modem.
3Com and U. S. Robotics are registered trademarks; x2 andConnections are trademarks of 3Com Corporation. Windows is a
registered trademark of Microsoft Corp. All other trademarks are used for identification purposes only and may be trademarks
and/or registered trademarks of their respective companies. Copyright ©1998 3Com Corporation. All rights reserved.
IMPORTANT! In accordance with the ITU-T standard for 56K transmissions, this modem is capable of receiving downloads at up
to 56 Kbps and sending at up to 31.2 Kbps. Due to FCC regulations on power output, receiving speeds are limited to 53 Kbps.
Actual speeds may vary. This product requires compatible analog phone line and server equipment. See www.3com.com/56k
for details.
your driver diskette
driver diskette into
rt Disk” screen
driver diskette
nch
drive. Click
Files” screen
k
.
d New Hardware
r diskette into your
ct Search for the
. Select
ur 3.5-inch drive is
f this screen. Click
peat this process
diskette into your
ble-click the My
rive icon. Double-
p” screen appears,
rces tab, you will
our modem. Click
Change” window
ter.