3Com 3106c - NBX Wireless VoIP Phone User Manual - page 61
Establishing a Conference Call Using Feature Codes
61
Blind Transfer
In a blind transfer, you transfer the call without notifying the recipient:
1 While on a call, press the Xfer button. The system places the call on hold
and selects a new line.
2 Dial the number to which you want to transfer the call.
3 As soon as you hear a full ring, press the Xfer button and hang up.
If you press the Xfer button too soon after you dial the number, the
transfer might not occur.)
Direct Mail Transfer
You can transfer a call directly into another user’s voice mailbox. The call
does not ring on that user’s telephone.
Calls transferred to a user’s mailbox by means of Direct Mail Transfer are
always directed into that user’s voice mailbox, even if the recipient has
specified a different call coverage point.
On a 3Com Cordless Telephone:
1 While you are on a call, press Feature + 441.
2 Dial the voice mail extension to which you want to transfer the call.
3 Hang up the handset.
Establishing a
Conference Call
Using Feature
Codes
You can establish a Conference Call with up to four parties, including
yourself. You must be using a telephone on the NBX system to establish
the call. The other three parties can be any combination of internal and
external parties.
From a 3Com Cordless Telephone, follow these steps:
1 Dial a call, or receive a call from someone else. Two parties are now on
the call.
2 While on the call, press Feature + 430. The system selects a new line and
places the first party on hold.