3Com 3106c - NBX Wireless VoIP Phone User Manual - page 92
92
C
HAPTER
6: G
ETTING
M
ORE
FROM
Y
OUR
T
ELEPHONE
S
YSTEM
Paging the System
When you page the system, you broadcast a message to all internal
extensions with speakers, to a Public Address (PA) system, or to both
simultaneously. Paging codes, as described in
Table 10
, have default
values for each destination.
To page, perform the following steps using your 3Com Telephone:
1 Remove the handset from the charging unit.
2 Press the Talk button.
3 Dial the appropriate paging code on your system.
4 Speak the broadcast message into your handset.
5 Hang up.
Paging Zones
A page zone is a subset of internal extensions to which you can direct a
broadcast using a configured extension. You can page a zone, a P.A.
system, or both the zone and the P.A. system simultaneously. Zone
extensions are configured by the System Administrator.
To discover the page zone extensions on your system:
1 Log in to NBX NetSet > Personal Information > User Information >
Page Zones.
The NBX NetSet utility lists the existing page zones and their extension
numbers.
2 Click Details to list the members of each zone.
Table 10 Paging Codes
Feature
3-digit dial plan
(default codes)
4-digit dial plan
(default codes)
External Paging
Broadcast an announcement over a public address system that has a
paging amplifier and speaker system that is connected to your NBX
system
620
6200
Internal Paging
Broadcast an announcement through the speakers on all 3Com
Telephones with speakers on your system except those that have been
set to Do Not Disturb.
621
6201
Simultaneous Paging
Broadcast an announcement externally and internally at the same time.
622
6202