3Com CMX 3CR292-DE56 Quick Installation Manual
3Com U.S. Robotics
Cable Modem
CMX
Quick Installation Guide
What You Need to Install Your Cable Modem CMX
IIn
nccllu
ud
de
ed
d::
•
Cable modem
•
Cable modem power supply
•
RJ-45 network cable
•
Rubber feet and stacking clips kit
•
Cable Connections
CD-ROM
•
This Quick Installation Guide
•
User’s Guide & Reference
PN 1.024.1970-00
Copyright
3Com Corporation. All rights reserved. 3Com and U.S. Robotics
are registered trademarks and Connections is a trademark of 3Com
Corporation. Windows is a registered trademark of Microsoft Corp.
Macintosh is a registered trademark of Apple Computer, Inc. Any other
trademarks, trade names, or service marks used in this manual are the
property of their respective owners.
N
No
ot
t IIn
nccllu
ud
de
ed
d::
•
A PC running Windows
95 (or later) or a Macintosh
running System 7.5 (or later) with TCP/IP protocol
installed (see the “Before You Begin” section in the
included User’s Guide & Reference for more information
about installing TCP/IP)
•
An active two-way cable line
•
An active Ethernet port or network interface card (NIC)
installed in your computer
•
A 7/16 inch (or adjustable) wrench for securing the cable
line to the modem
•
A screwdriver, pushpins, and screws (for optional wall-
mounting). The screw heads should be at least 0.2” (5mm)
in diameter for them to be properly captured in the slot. If
you are using wood screws, use #6 pan heads or
equivalent.