3Com CMX 3CR292-DE56 Quick Installation Manual - page 6
INSTRUCTIONS FOR WALL-MOUNTING THE CABLE MODEM
1
Remove this template from
this
Installation Guide.
4
Secure the screws in the starter
holes, leaving at least 1/4" (6mm)
clearance.
3
Insert pushpins into the
cross hairs on the template.
2
Place the template at least 20" (50 cm)
above and parallel to the floor.
INSTR
UCTIONS FOR
W
ALL-MOUNTING
THE CABLE MODEM
W
all-mounting T
emplate
See other side f
or basic instr
uctions
.
For complete instr
uctions
, see the
User's Guide & Ref
erence
.
INSTR
UCTIONS FOR
W
ALL-MOUNTING
THE CABLE MODEM
W
all-mounting T
emplate
See other side f
or basic instr
uctions
.
For complete instr
uctions
, see the
User's Guide & Ref
erence
,
20"
[50 cm]
INSTR
UCTIONS FOR
W
ALL-MOUNTING
THE CABLE MODEM
W
all-mounting T
emplate
See other side f
or basic instr
uctions
.
For complete instr
uctions
, see the
User's Guide & Ref
erence
.
1/4"
[6 mm]
Starter hole
Screw
5
Attach the cables.
CATV
SERI
AL
10 BT
power supply
(to wall outlet)
cable line (to cable
outlet)
RJ-45 cable
(to NIC)
6
Fit the mounting holes over the screw heads
and slide the unit down until it locks in place.
Screws
®
®