3Com EtherLink 3C900B User Manual - page 65
Configuring the DynamicAccess LAN Agent
59
Configuring the DynamicAccess LAN Agent
Consult your system administrator about using DynamicAccess technology at your site.
The instructions in this section are for configuring the DynamicAccess LAN agent on a
local PC. You can obtain the complete configuration instructions by accessing the 3Com
DynamicAccess Technology User Guide on the EtherCD.
To configure the DynamicAccess LAN agent on a local PC:
1 Double-click the 3Com DynamicAccess icon in the Windows Control Panel.
The Traffic Prioritization tab of the DynamicAccess Setup screen appears.
2 Select the tab containing the information you want to configure.
Traffic Prioritization — Allows you to prioritize applications, which can ease
bottlenecks in your network and allow critical applications to take network
precedence.
Fast IP—Allows you to enable and configure Fast IP.
Administration—Allows you to set DynamicAccess control panel access, set VLAN
options, enable efficient multicast control, and enable the prioritizing of traffic.
Removing the DynamicAccess LAN Agent
For instructions on removing the DynamicAccess LAN agent from your PC, refer to the
DynamicAccess Software User Guide. This user guide can be accessed on the EtherCD.
NOTE: The DynamicAccess LAN agent configuration instructions are intended for
network administrators who have experience installing software and using
management tools for an Ethernet network.
NOTE: For specific instructions on configuring any of the DynamicAccess
technology options, click Help on the 3Com DynamicAccess screen or go to:
http://www.3com.com/dynamicaccess