3Com EtherLink 3C900B User Manual - Installing From Diskette
65
D
Installing From Diskette
This appendix describes how to create installation diskettes from the EtherCD.
If your PC does not have a CD-ROM drive, access a PC that has a CD-ROM drive and
create installation diskettes from the EtherCD.
You can also download the EtherCD software and place it on diskettes from the 3Com
World Wide Web site:
http://www.3com.com/
Before you start, make sure that you have two blank, formatted diskettes. Label the
diskettes EtherDisk 1 and EtherDisk 2.
■
EtherDisk 1 contains:
■
NDIS 3/4/5 drivers
■
NetWare server drivers
■
Windows for Workgroup drivers
■
NIC preinstallation program
■
README.TXT file
■
EtherDisk 2 contains:
■
NDIS 2 driver
■
PACKET driver
■
Help text files
■
DOS utilities
To create installation diskettes from the EtherCD:
1 Turn on the power to the PC and start Windows.
2 Insert the EtherCD in the CD-ROM drive.
The EtherCD Welcome screen appears.
If the EtherCD Welcome screen does not appear, enter the following command from
the Run option of the Windows Start menu:
d:\installs\setup.exe
where d:\ represents the letter name of the CD-ROM drive.
3 Click NIC Software.
4 Click NIC Drivers and Diagnostics.
5 Click Installation Utilities.
6 Click Create Installation Diskettes.
The EtherCD Diskette Creation Utility Welcome screen appears.
NOTE: The installation diskettes allow you to install only the driver. If you want to
install the NIC diagnostics or desktop management software, you must install
them from the EtherCD.