3Com OfficeConnect 3C3SH573BT Software Manual - page 7
Windows 2000
7
Windows 2000
1 Select
Start
/
Settings
/
Control Panel
/
Network and Dial-up Connections
.
2 Right-click
Local Area Connection
and select
Properties
.
The Local Area Connection Properties window will appear.
3 Verify that the
Connect using:
text box displays:
FE573B-3Com 10/100 LAN CardBus-Fast Ethernet
.
4 From the
Components checked are used by this connection:
list box, select
Internet Protocol (TCP/IP)
.
5 Click
Properties
in the Local Area Connection Properties window.
The Internet Protocol (TCP/IP) Properties window will appear.
6 If your ISP provided a specific IP address and subnet mask, click
Use the following IP address:
and
type the addresses in their respective text boxes.
7 If you received a gateway address, type the address in the
Default Gateway:
text box.
If you did not receive a gateway address, leave the text box blank.
NOTE:
You may have more than one local area connection.