3Com OfficeConnect 3C3SH654B User Manual - Indows
2
W
INDOWS
2000
Installing the PC Card
1 Insert the Installation CD into the CD-ROM drive. The auto-start feature starts the
installation. If auto-start is disabled on your computer, click Start>Run and type
d:\setup.exe (where d: is your CD-ROM drive).
2 Insert the PC Card into the PC Card slot as shown in Chapter 1.
After inserting the PC Card, if auto-start is enabled and nothing happens within
five seconds, reboot your computer and log in to Windows 2000. The installation
process will begin when the computer restarts.
3 Respond to the prompts as they appear.
During the installation process, you may receive prompts for the PC Card
Installation CD. Insert the CD and select the path from the drop-down list. Click
OK. The path is d:\install\disks\win2000, where d: is your CD-ROM drive.
During the installation process, you may also receive prompts for the Windows
2000 installation CD. Insert the CD and indicate the correct path.
4 Restart your computer if prompted.
Confirming
Installation
Checking that the LAN
Interface is Present
1 Double-click the My Computer icon.
2 Double-click the Control Panel icon.
3 Double-click the System icon. The System Properties box appears, detailing your
system setup.
4 Click the Hardware tab and then the Device Manager button. A list of devices
appears, arranged by type.
5 Double-click Network Adapters. The LAN+Modem card name appears, confirming
successful installation.
6 Double-click the entry for the LAN+Modem card to display a description of the
card and its current status. The device status should indicate “This device is
working properly.”
7 Click Cancel to return to System Properties.
8 Click OK to exit System Properties.