3Com OfficeConnect 3C3SH654B User Manual - page 34
28
C
HAPTER
5: W
INDOWS
NT
7 Depending on your current network settings, you may see the Microsoft TCP/IP
Properties screen.
8 When prompted to reboot the computer, remove the Installation CD from the
CD-ROM drive and click Yes.
Installing the Modem
Interface
1 Put the Installation CD in the CD-ROM Drive.
2 From the Windows Start Menu select Run.
3 Browse to d:\install\disks\winnt40\standard (where d: is your CD-ROM drive) and
find the WMSETUP.EXE program on the installation CD.
4 Select WMSETUP.EXE and Click OK to run the program.
5 In the setup window, select Install.
6 When prompted, set your COM port and click OK.
Uninstalling the Card
To remove the card and LAN software from your system:
1 From the Control Panel, open Network/Adapters.
2 Select SH654B - 3Com OfficeConnect LAN + Global Modem -(Fast Ethernet) and
click Remove. Do not reboot until you have deleted the modem interface as
described below.
3 Reboot.
To remove the modem:
1 Put the Installation CD in the CD-ROM Drive.
2 From the Windows Start Menu select Run.
3 Browse to d:\install\disks\winnt40\standard (where d: is your CD-ROM drive) and
find the WMSETUP.EXE program on the installation CD.
4 Select WMSETUP.EXE and click OK to run the program.
5 In the setup window, select Uninstall.