3Com OfficeConnect 3C886A Release Note - page 5
Configuring the Server LAN Modem
5
2
Click
Dial-in Global
.
Figure 2
Dial-In Global Parameters Screen
1
If you are planning to use the Callback feature, use the Callback Prefix field to
enter the number required to get an outside line, such as a 9. Otherwise, leave this
field blank.
2
In the LAN to LAN Site Number, designate the LAN Modem site for dial-in access
from other LAN Modems which will employ the LAN Modem Site-to-Site scenario.
Note that setting the site number may change the IP address of the LAN Modem,
as described below.
■
Choose
None
(the default) to leave the LAN Modem’s IP address unchanged.
You might choose
None
if you will never employ the LAN Modem Site-to-Site
scenario with this LAN Modem (that is, all your dial-in users will employ the
Single-User Dial-in scenario, and do not require LAN-to-LAN connectivity), or
an advanced user might choose
None
if the IP address of the LAN Modem has
been manually configured for static IP addressing.
■
Choose
Site A
to designate this LAN Modem’s IP address as 192.168.1.1 (the
LAN Modem default IP address).
■
Choose
Site B
if this LAN Modem will place or receive calls to another LAN
Modem which has been configured as Site A. Choosing
Site B
will change this
LAN Modem’s default IP address to 192.168.2.1
For example, if you have already designated a remote LAN Modem as
Site A, and you are now setting up a second LAN Modem for LAN-to-LAN
connectivity, you would designate this second LAN Modem as Site B. This
will differentiate between the two LAN Modem IP addresses, which by
default are the same.