3Com PathBuilder S200 Series User Manual - Configuration
Manual is about: 3Com Switch Owner Manual
of
32
Transparent Polled Async
5
Configuration
Configuration
Overview
This section explains how to configure Transparent Polled Async (TPA) on
PathBuilder S200 series switch platforms. Refer to the Configuration Basics Guide
for information on logging on and accessing the Main menu from the CTP.
Figure 3 illustrates the PAD Profile parameters required to accommodate the
different TPA environments. TPA parameters are enabled only when the parameter
PAD Mode is set to 1 or 2 and cannot be used unless the TPA option has been
purchased and enabled on the node.