3Com PathBuilder S200 Series User Manual - page 18
Manual is about: 3Com Switch Owner Manual
of
32
12
Transparent Polled Async
Administration
Boot Command
Overview
Booting updates a node’s operational parameters by using the parameters stored in
configuration memory (CMEM).
Follow These
Steps...
To designate a TPA PAD Profile as the current running profile for the PAD port:
For More Details...
For more information regarding the Boot command, refer to the Configuration
Basics Guide.
Step
Action
1
Select Boot from the Main menu.
2
Select Table and Node Record from the Main menu; the Boot menu is
redisplayed.
3
Select Port from the Boot menu and complete the process by booting the
specific port.