3D Systems ProJet 1200 User manual - page 45
Other manuals for ProJet 1200:
User Manual
Manual is about: Professional 3D Printer
Original Instructions
of
46
40
3D Systems, Inc.
6 . Pack them back into the cardboard box that they came in.
7 . Carefully place the printer in the lower boxed foam support.
8 . Place the upper foam insert (A) on the top of the printer . Place the
peripherals box (B) on top of the foam insert as shown.
9 . Place original box over top of printer so it covers entire machine.
10 . Insert plastic handles in holes on the sides of the box.
11 . Press tabs (A) into side of plastic insert to secure handles to the box.
A
B