3D Systems ProX 500 User Manual - page 15
3D Systems, Inc.
15
ProX 500 Stack Lights
The stack lights let the user know from a distance what state the system is in . There is a stack light for both the
main system and the MQC System .
ProX 500 SLS System Stack Light Conditions
Light Color
Solid
Flashing
Off
Red
E-Stop condition
System fault active
Normal
Yellow
System is in service mode
System warning active and/or
message present on touchscreen
E-Stop condition or
normal
Green
Print job active
System Active, not printing, manual
operations possible
E-Stop condition or
normal
Part Transfer Cart Assembly
The print cake
Extraction Cylinder
,
Part Transfer Tray
and
Part
Transfer Cart
, are used to remove the print cake from the ProX 500 print
chamber and transport it to the MQC System . The system ships with the
cylinder and tray . The transfer cart is optional .
Part Transfer Cart
Part Transfer Tray
Extraction Cylinder