3D Systems ProX 950 User Manual - page 35
Other manuals for ProX 950:
Facility Requirements Manual
of
62
3D Systems, Inc.
8. Back on the wizard home screen, when you tap the
Edit button next to Part
Recoat Style, you will see the dialog window at the right. From here, all part
recoat parameters can be modified and extra sweeps can be added.
9. Back on the wizard home screen, when you tap the
Add Recoat Range
button, you will see the dialog window at the right. Adding ranges is very
similar to adding ranges in 3D Manage. The user selects
start and end Z
ranges.
10. Ranges added between existing
ranges will automatically create
additional ranges to fill in the full
Z range.
a. Example: Add range 12mm-
20mm to a build with Z
range of 0-21.2mm
35