3D Systems ProX 950 User Manual - page 40

3D Systems, Inc.

Removing Bubbles

If bubbles appear in material, they must be removed prior to 

starting a print. Follow these steps to remove bubbles:

1.  Navigate to the 

Tools

 menu.

2.  Select 

Remove Bubbles

 (1).

3.  Wait while bubbles are removed.

4.  When recoater returns to home position print can be 

started.

Printing a Part

1.  Select the Prints menu (2).

2.  Insert USB drive into the port below the touch screen (3). Files 

can also be transferred from the application software - Option 

1 or 2.

3.  All .bff files on drive will pop up on screen. Select file you wish 

to print.

4.  Tap the Submit button.

5.  The file selected should be loaded in the prints queue. 

6.  If file is not in the top position, tap the file to highlight it, then 

tap the 

Jump to Top

   button to move the file to the top of 

the queue (4).

3

2

4

1

7.  Tap the 

Play

 button next to the .bff file desired to print, or wait 

for the file print to pop up in the top left corner and then tap 

the 

Play

 button (5).

8.  Wait for the machine to fully print the first layer to ensure that 

the print has successfully started. You can see which layer the 

machine is printing by looking at the UI.

5

40