3DR Solo User Manual - 9.4  Legs

42

9.4  Legs

Solo uses three unique types of legs: 2 legs with an antenna module (#1 and #2), a leg without any electronic 

components (leg #3), and a leg with a compass module (leg #4). Replacements for all types of leg can be purchased 

from store.3dr.com or an authorized retailer.

Figure 9.4.2.1: Leg Types

9.4.1 

Leg #3

To replace a standard leg, use a #2 Phillips screwdriver to remove the two screws, detach the old leg, and attach 

the new leg using the provided screws. 

Figure 9.4.1.1: Standard Leg Replacement Process

9.4.2 

Legs #1 and #2 with Antennas

To replace a leg with an antenna module where the antenna is physically undamaged, you’ll need to remove the 

antenna from the old leg before replacing it.

To detach the antenna, remove the plastic sheet from the leg (1) and detach the antenna from the Velcro by carefully 

pulling the cable (2). Follow the standard leg replacement procedure to detach the old leg (3).

1

Compass

Antenna

Antenna

Standard