3DR Solo User Manual - 9.5 Battery Tray
45
9.5 Battery Tray
The battery tray holds the battery and GPS in place, and allows you to access the main electronics bay. This section
covers how to remove to tray to access the interior of Solo.
9.5.1
GPS Cover
The GPS cover is the flat, black end cap in front of the battery tray. To remove it, use a small, flat prying tool to
loosen the four clips along the back edge of the cover.
Figure 9.5.1.1: GPS Cover Removal
9.5.2
Battery Tray Removal
To detach the battery tray and access Solo’s main electronics bay, use a small Philips screwdriver to remove the 7
screws securing the battery tray to Solo.
Figure 9.5.2.1: Battery Tray Removal
The battery tray will still be connected to Solo via the GPS cable, so carefully lift out the tray just enough to access
the board beneath.
Figure 9.5.2.2: Battery Tray Detachment
GPS connector