3DR Solo User Manual - page 52
Other manuals for Solo:
User Manual, User Manual, Installation Instructions Manual, Operation Manual
of
57
47
Figure 9.6.2.3: Motor Pod Disconnection
Connect the 3 cables from the arm to the new motor pod. Tuck the cables inside the arm and set the new pod into
place.
Figure 9.6.2.4: Motor Pod Connection
Turn over Solo and secure the new motor pod into place using the 4 provided screws. Do not reuse the screws from
the old Motor Pod. Finally, snap the LED cover back into place.
Figure 9.6.2.5: Motor Pod and LED Cover Attachment
1
2