3M DE343 Product Safety Manual - page 6
6
3M™ Digital Easel
© 3M 2005. All Rights Reserved.
Installation
4. Align the wall bracket holes over the wall anchors
and secure with the provided washer and anchor
screws. Confirm that the wall bracket is level
before tightening the screws.
Note: For other types of wall material (e.g. wood,
concrete, concrete block) use mounting hardware
that is properly rated for the weight of the unit and is
intended for specific wall material.
Hanging on the Wall
1. If possible, position the 3M Digital Easel in front
of the wall where the bracket is located. Position
the unit on the floor on its backside so that the top
is closest to the wall.
2. Clear the path from the unit to the wall where it
will be hanging.
WARNING
To reduce the risk associated with muscle strain:
• Always use more than one person when installing or removing the 3M Digital Easel.
3. With one person holding each side of the unit,
carefully lift it into position so that the bracket slot
is above the wall hanger bracket and then lower
into mating position onto wall hanger bracket.
Ensure that the unit is securely in place before
releasing.