3M DE343 Product Safety Manual - page 7
of
8
7
3M™ Digital Easel
© 3M 2005. All Rights Reserved.
Installation
4. Remove the “L” bracket from the bottom of the
unit, and rotate it so that the half-round portion
is flat against the wall. Align the bracket with the
mounting hole, and mark the bracket hole location
on the wall.
5. Using a Phillips screw driver, screw the supplied
anchor into the wall until it is flush with the wall
surface for the identified hole location.
6. Secure the unit to the wall by attaching the “L”
bracket to the 3M Digital Easel and wall using the
provided washers and anchor screws.