Summary of Jooltool
Page 1
1-888-337-1230 www.Jooltool.Com info@jooltool.Com by owner’s manual.
Page 2: Power Tool Safety Rules
! Power tool safety rules please read and understand all instructions before using your jooltool® system failure to follow instructions listed below may result in serious personal injury, electric shock and / or fire. Work area always secure the machine unit to a bench top with two (2) screws using ...
Page 3: Power Tool Safety Rules
! Power tool safety rules personal safety avoid accidental starting. Make certain speed control switch is “off” before plugging in. Leaving the speed control switch “on” can lead to accidents. Do not leave unit unattended. Always turn the unit “off” regardless of the situation or circumstance. A run...
Page 4: Power Tool Safety Rules
! Power tool safety rules electrical safety always use a properly grounded 110 / 240v electrical outlet. Always use approved electrical outlet adaptors when using the unit outside of the u.S.A. Never alter the plug or tamper with the converter box in any way to fit into an electrical outlet other th...
Page 5: Power Tool Safety Rules
! Power tool safety rules cleaning always disconnect power from the tool before cleaning. Always wear safety goggles when using compressed dry air for cleaning. Ventilation openings and switch levers must be kept clean and dry. Do not attempt to clean by inserting pointed objects through openings. C...
Page 6: Power Tool Safety Rules
! Power tool safety rules ninja see-thru™ backpad safety rules note: the rotation of the disc is counter clockwise. The motor should be completely stopped and the switch “off” before installing the backpad. The backpad should always be installed with abrasive side down. Always hold the work piece di...
Page 7: Power Tool Safety Rules
! Power tool safety rules abrasive safety - installation & operation always remove all protective backing film off abrasive disc before applying onto the backpad. Always make sure all adhesive residue from used abrasive and/or dust particles have been completely removed from the backpad before apply...
Page 8: Starting Up
Starting up unpack your jooltool™ system make sure everything you need is there: jooltool™ unit power cord & adaptor abrasive kit* instructional dvd* disc retainer how to use backpads & abrasives know what you want to accomplish and what abrasives will be required. Always make sure the correct abras...
Page 9: Starting Up
Starting up note: do not overtighten. This can cause thread to strip. Installing abrasives installing backpads installing ninja™ cushion backing if applied onto backpad before abrasives, these give incredible performance! Step 1: place backpad on the spindle with abrasive side down. Step 2: screw ba...
Page 10: Operation
Operation holding the workpiece hold the workpiece directly underneath the disc. Apply the workpiece to the bottom of the spinning disc gently and with even pressure. Stay within the see-thru area of the disc! Do not work or slide off the edge of the disc! The tool’s sharp edge or tip can trim the o...
Page 11: Operation
Operation these are general rules of operation intended as guidelines only. For more information, consult the provided instructional dvd. For long flat-edged tools rule of thumb: follow the steps described on the previous page while gradually & evenly moving/gliding the tool’s edge from right to lef...
Page 12: Color
Color abrasive grade application please see below for additional accessories that broaden your jooltool experience contact us for info about more great products! Felt disc depends on compound buffing & polishing metal, glass, stone polishing film kit makes grit switching faster and simpler! Have one...
Page 13: Operation
Operation these are general rules of operation intended as guidelines only. For more information, consult the provided instructional dvd. Using the ninja see-thru™ felt wheel important! Mount your felt disc onto a backpad before use! Only when using the felt disc for the very first time, you should ...
Page 14: Removing The Front Lip
Installing the disc retainer the retainer prevents backpads from ejecting should you forget to tighten them onto the spindle. Note: removing it does not affect tool performance. To install the retainer, simply follow these steps. (reverse steps to remove) removing the front lip your jooltool’s remov...
Page 15: Removing The Hood
Removing the hood your jooltool’s hood (or shroud) is removable for full clearance around the spindle and cleaning. Note: removing hood renders airflow less controlled. First remove the front lip and the spindle (see previous page), then simply follow these steps to remove. (reverse steps to re-inst...
Page 16: Step 1
These are general rules of operation intended as guidelines only. For more information, consult the provided instructional dvd. Using the 3m™ scotch-brite™ cluster this scotch-brite™ cluster is one of the most versatile wheels in the jooltool accessory line. It can be used on a variety of tasks and ...
Page 17: Step 2
These are general rules of operation intended as guidelines only. For more information, consult the provided instructional dvd. Using 3m™ scotch-brite™ bristle brushes the perfect alternative to wire brushes. They are excellent on any metal and wood for sanding, cleaning, texturing and polishing. Id...
Page 18: Bristle Brush Chart
Bristle brush chart abrasives by exclusively for jooltool 18 brushes applications on wood step 1 step 2 step 3 step 4 step 5 step 6 grit 80 grit 120 grit 220 grit 400 micron 6 micron 1 step 4.5 pumice yellow white maroon blue pink peach green cleans firescale, heavy rust & metal castings, removes de...
Page 19: Warranty Information
Warranty information jooltool limited warranty the jooltool® company makes the following limited warranty to original consumers in the united states. Limited one (1) year warranty on parts and labor this limited warranty extends to the original consumer purchaser or any person receiving this power t...
Page 20: 1-888-337-1230
1-888-337-1230 www.Jooltool.Com info@jooltool.Com © 2012 jooltool. 3m is a trademark of the 3m company and used under license. All rights reserved thank you for your purchase! If you would like additional accessories for your jooltool your nearest jooltool retailer will most likely carry our full li...