3M Jooltool Owner's Manual - Step 2
THESE ARE GENERAL RULES OF OPERATION INTENDED AS GUIDELINES ONLY.
FOR MORE INFORMATION, CONSULT THE PROVIDED INSTRUCTIONAL DVD.
USING 3M™ SCOTCH-BRITE™ BRISTLE BRUSHES
The perfect alternative to wire brushes.
They are excellent on any metal and
wood for sanding, cleaning, texturing
and polishing. Ideal uses include jewelry
polishing, satin finishing watch bands &
bracelets, deburring turning tools and
serrated knives, cleaning wood carvings
or golf clubs among many others.
Use them on the JOOLTOOL or
HANDPIECE of your choice.
Brushes are available in the following
sizes: 9/16”, 3/4”, 1”, 2” and 3” diameter.
To use, simply follow these steps
Install brushes so that the spinning bristles “sweep”, not “grab”!
NEVER OVERTIGHTEN brush on spindle.
Center core can become damaged & unsafe.
STORE IN A COOL AND DRY PLACE, AWAY FROM WATER & WET SURFACES.
STEP 2
Hold the workpiece
parallel to the wheel
rotation. Apply only
LIGHT pressure.
STEP 3
Apply even strokes from
right to left or hold
workpiece in place until
desired result is achieved.
!
STEP 1
Screw brush onto the
spindle.
Make sure it is
CENTERED and EVEN.
17
Abrasives by
Exclusively for JOOLTOOL