3M Wall Display Safety Manual - page 4
P R O D U C T A N D S A F E T Y I N F O R M A T I O N
WA L L D I S P L AY
4
• Always unplug appliance from electrical outlet before cleaning and servicing and
when not in use. Grasp plug and pull to disconnect.
• To reduce the risk of electric shock, do not immerse this appliance in water or
other liquids.
• To reduce the risk of electric shock, do not disassemble this appliance. Request a
qualified technician when service or repair work is required. Incorrect reassembly
can cause electric shock when the appliance is subsequently used.
• Connect this appliance to a grounded outlet.
• Keep all ventilation openings free of any obstructions.
• The projection lamp contains mercury. Always dispose of this lamp in a proper
manner according to local regulations.
• Do not apply force to the projection arm. This may cause permanent damage to
the unit or may cause personal injury.
• Do not manually open or close the projection arm while the Wall Display is in
operation.
• The Wall Display’s projection arm is motorized, and extends 36˝ (92 cm) from
the installation while in use. Caution should be taken when operating or walking
near the Wall Display. It is possible a tall person’s head or an upraised hand
could come in contact with the projection arm.
• Do not place the product in direct sunlight, near heaters or heat radiating
appliances.
ENGLISH