Eap717 v1.00 enterprise access point.
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. I copyright notice this document is protected by usa copyright laws and other laws. Besides, the document is the property of 4ipnet, inc. You may not copy, reproduce, distribute, publish, di...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. Ii fcc caution this equipment has been tested and proven to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide re...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. Iii ce caution declaration of conformity with regard to the 1999/5/ec (r&tte directive) for european community, switzerland, norway, iceland, and liechtenstein model: eap717 for 2.4 ghz radi...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 1 preface package contents the 4ipnet eap717 enterprise access point is an on-the-wall as well as a ceiling-mounted wi-fi ieee 802.11n/a/b/g 2 x 2 mimo access point, designed to blend into a...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 2 system overview front panel 1 2 3 4 5 eap717 front panel 1 lan 1 – 2 ports attach ethernet cables here to connect to the wired local network. 2 uplink (poe) port for uplink connection. Thi...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 3 rear panel 1 2 3 eap717 rear panel 1 wes button wds easy setup. Press the button to build up a wds link with another peer. 2 restart / reset button press once to restart the system; press ...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 4 hardware installation please follow the steps mentioned below to install the hardware of eap717: step 1. Place the eap717 at the best location. The best location is usually at the center o...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 5 getting started 4ipnet eap717 supports web-based configuration. When hardware installation is complete, eap717 can be configured through a pc by using a web browser such as mozilla firefox...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 6 4. After a successful login to eap717, a system overview page of the web management interface will appear, as depicted below. The radio status and ap status will be shown. The web manageme...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 7 common settings step 1. Change administrator ’s password change password page click on the utilities icon on the main menu, and select the change password tab. enter the old password a...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 8 step 2. Configure general ap (access point) settings wireless general settings page click on the wireless icon on the main menu, and then select the general tab. select the rf card you...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 9 step 3. Configure vap (virtual access point) profile settings vap configuration page (vap-1 shown) the eap717 supports up to 8 virtual aps (vaps). configure vap profile settings: (a) s...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 10 virtual ap overview page step 4. Configure wds (wireless distribution system) settings (optional) to extend the wireless coverage, eap717 supports up to 4 wds links for connecting wireles...
Quick installation guide eap717 enterprise access point english copyright © 4ipnet, inc. All rights reserved. 11 click on the wireless button on the main menu. select the repeater tab. choose wds as the repeater type. choose the desired rf card and wds profile: (a) enable wds. (b) enter the ...