4IPNET EAP717 Quick Installation Manual - Getting Started
Quick Installation Guide
EAP717 Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
5
Getting Started
4ipnet EAP717 supports web-based configuration. When hardware installation is complete, EAP717 can be
configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0
and above.
The default values of LAN IP address and subnet mask of EAP717 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP717 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP717 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP717 (http://192.168.1.1) at the
address field, and then press Enter.
3. The following Admin Login Page will appear. Enter
“admin” for both the Username and Password fields,
and then click Login.
Administrator Login Page