4xem IPCAMWL40 User Manual - Software Revision Upgrade

- 33 - 

Software revision upgrade 

Customers can obtain the up-to-date software from the web site. An easy-to-use 

Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The 

upgrade function is opened to the Administrator only. To upgrade the system, follow 

the procedures below. 

1. Download the firmware file named FLASH.BIN from the appropriate product folder. 

2. Run the Upgrade Wizard and proceed following the prompts. Refer to the 

instructions of the Upgrade Wizard for details. 

3. The whole process will finish in a few minutes and it will automatically restart the 

system. 

 If power fails during the writing process of Flash memory, the program in the 

memory of the Network Camera may be destroyed permanently. If the Network 

Camera cannot restart properly, ask your dealer for technical service.