4xem IPCAMWL40 User Manual - Drive The Digital Output

- 54 - 

C. URL commands of the Network Camera 

For some customers who already have their own web site or web control application, 

the Network Camera can be easily integrated through convenient URLs. This section 

lists the commands in URL format corresponding to the basic functions of the erase 

Network Camera. 

Capture update Snapshot of JPEG image 

/cgi-bin/video.jpg 

The Network Camera will return the most up-to-date snapshot in JPEG format. 

Query status of the digital input 

/cgi-bin/getdi.cgi 

The Network Camera will return the status of digital input. 

Drive the digital output 

/cgi-bin/setdo.cgi?do= 

The state is either “H”, “L”. “H” means high that is NC is connected with COMMON and 

“L” means means low that is NO is connected with COMMON. 

For instance, typing http://192.168.0.201/cgi-bin/setdo.cgi? Do=h in the address bar 

of the web browser will command the Network Camera, with IP address of 

192.168.0.201, to set digital output to connect to NC with COMMON. 

Restore factory default settings 

/setup/restore.cgi