4xem sku IPCAMW40 User Manual - Software Installation

- 7 - 

Software installation 

In this manual, "User" refers to whoever has access to the Network Camera, and 

"Administrator" refers to the person who can configure the Network Camera and grant 

user access to the camera. 

At the end of the hardware installation, users can use Installer program included in the 

product CDROM to find the location of the Network Camera. There may be many 

Network Cameras in the local network. Users can differentiate the Network Cameras 

with the serial number. The serial number is printed on the labels on the carton and the 

bottom of the Network Camera body. 

The IP addresses shown in the 

"Current IP Address" field 

reflect those on the local 

network.  They may be from 

the DHCP server.  If there is 

no DHCP server, the camera 

will try to find a free IP 

address (this takes from 15 

second to 3 minutes, 

depending on the LAN status). 

The method of finding IP 

address is seeking from 

192.168.0.99