4xem WL80 User Manual - page 75
- 71 -
update
(w)
1
Update the above settings
Preview
Apply the parameter of image but
not save
Restore
Restore the last saved image
parameters
mode
(w)
Save
Directly save the adjust image
parameters
Group: Motion
NAME VALUE DESCRIPTION
0
disable motion detection
enabled
(r/w)
1
enable motion detection
0
disable motion window #1
winenabled_<1~3
>
(r/w)
1
enable motion window #1
winname_<1~3>
(r/w)
than 14 characters > name of motion window #1 winleft_<1~3> (r/w) 0 ~ 352 for CCD 0 ~ 320 for CMOS Left coordinate of window position. <0> wintop_<1~3> (r/w) 0 ~ 288 for PAL 0 ~ 240 for NTSC & CMOS Top coordinate of window position. <0> winwidth_<1~3> (r/w) 0 ~ 352 for CCD 0 ~ 320 for CMOS Width of motion detection window. <0> winheight_<1~3> (r/w) 0 ~ 288 for PAL 0 ~ 240 for NTSC & CMOS Height of motion detection window. <0> winobjsize_<1~3> (r/w) 0 ~ 100 Percent of motion detection window <0> winsensitivity_<1~ 3> (r/w) 0 ~ 100 Sensitivity of motion detection window <0>