909 909210TS Instruction Manual - Description Of Symbols
3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
For safe operation read instruction manual.
Specifications
Voltage:
230 – 240Vac ~ 50Hz
Power Rating:
1200W
No Load Speed:
4800RPM
Maximum Cutting Depth at 90°: 48mm
Maximum Cutting Depth at 45°: 45mm
Saw Blade:
Ø210mm x Ø16mm bore x 2.6mm
Saw Blade Type:
TCT (Tungsten Carbide Tipped)
Bevel Capacity:
0 – 45°
Dust Extraction Port: Ø36mm
Table Size:
Without Extension Tables:
525mm x 400mm
With Extension Tables:
525mm x 620mm
Net Weight:
14kg
Note.
Do not use a blade that is thinner than the riving
knife. Do not use a blade that is thicker than 3.5mm.
Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
WARNINGS
It may be more difficult to see the laser line in conditions of
bright sunshine and on certain surfaces.