A&D CC-Link Interface AD-4402-OP-20 Instruction Manual - page 21
AD-4402-20
Page 19
5.
5.
5.
5.Maintenance
Maintenance
Maintenance
Maintenance
5.1.
5.1.
5.1.
5.1.Monitor Mode
Monitor Mode
Monitor Mode
Monitor Mode
The monitor mode is used to check the indicator during the weighing sequence.
5.1.1.
5.1.1.
5.1.1.
5.1.1.
Operation and Display
Operation and Display
Operation and Display
Operation and Display
To enter the monitor mode
Press and hold the ENTER key and press the
key in weighing mode.
Select the menu
check
using the key and the
ENTER key.
Select menu
Option
and the OP-20 slot.
To select the kind of data
The
key or key
of RX, RY, RWr, RWw
To select an I/O No. or register No.
The ,
key or key
To exit the mode
The ESC key.
(To return to weighing mode)
123
kg
ST RX 00F-000 BUF.0E0
1 01001000 11011011 b
BR RY 00F-000 BUF.160
4 01001000 11011011 b
Remote input/output and Remote
register: RX, RY, RWr, RWw
Station No.
Baud rate
Range of remote input/ output or
Remote register
Buffer address
of master unit
b: Binary numbers
h: Hexadecimal numbers
Blank: Decimal numbers
LSB side
MSB side