A&D HW-100KGL Instruction Manual - 7.1.2

HW-G Instruction Manual Page 18

HW-G OZIM v1a

7.1.2

Type L with Batteries

Step 1 Install six new batteries. Refer to “5.1. Installing the batteries for Type L”.

Step 2 Ensure that the pan is empty.

Step 3 The scale turns on/off using the 

 ON/OFF 

 switch alternately.

Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after

warming up the scale for 30 minutes. You will need to disable the auto power

off function. See 15.2 page 43.

Step 5 Press the 

 ZERO 

 switch to display zero. (With nothing on the pan.)

Step 6 Gently place something on the pan.

Step 7 You can read the weight value after the stability mark is displayed.

Step 8 Remove the item from the pan.

Step 9 Turn the scale off using the  

ON/OFF

  switch.

Caution

Replace used dry cells with six new ones when 

BATT

 is displayed.

Battery life is affected by the environmental temperature.

Remove batteries from the display unit when the scale is not to be used for a long

time. The batteries may leak and cause damage.