A&D LCC11T010-K Instruction Manual - page 2
- 1 -
English
1. Precautions
This is a caution mark.
Note
Important information that helps users to operate the product.
2004
All rights reserved.
This manual is subject to change without notice at any time to improve the
product. No part of this manual may be photocopied, reproduced, or translated
into any language in any form by any means without the written permission of
A&D Company, Ltd.
Product specifications are subject to change without any obligation on the part
of the manufacturer.
2. LCC11 Series Compression Load Cells
The Type with Pre-Installed Accessories
Accessories are a bearing plate with upper socket and a mounting plate with
lower socket.
LCC11T010-K
(Rated capacity 100 kN )
LCC11T020-K
(Rated capacity 200 kN )
LCC11T030-K
(Rated capacity 300 kN )
The Type without Accessories
LCC11T010N-K
(Rated capacity 100 kN )
LCC11T020N-K
(Rated capacity 200 kN )
LCC11T030N-K
(Rated capacity 300 kN )
3. Introduction
The LCC11 series are high-performance, double convex compression load cells
and have flexibility of use for truck scale weighing systems and hopper scales.
The rated capacity range is from 100 kN to 300 kN. The LCC11 series can be
used in severe environments equivalent to IP68. The load cell, considering
installation and maintenance, is designed to be compact and lightweight, and is
constructed using a hermetic stainless steel case.
Consider the system design and installation carefully because for precision
weighing, the load cell is more sensitive. Read this instruction manual carefully,
for correct installation and precision weighing.