A-Neuvideo HD-88 Instruction Manual - page 10
REMOTE CONTROL
Before making any connections to the switcher. Observe the following:
> Ensure the mains voltage supply matches the label on the
supplied plug-pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a
common point.
> Avoid powering equipment within a system from multiple power
sources that may be separated by large distances
> Connect all audio video sources and destination equipment
> Power up all source and destination audio-visual sources
> For each destination output select the appropriate input source
by using the front panel input 1~8 select buttons. The supplied
IR remote control. Or through the RS -232 serial communications
port.
> Upon power up the switcher will return to its last used setting
before powered down.
REMOTE
CONTROL
IR REMOTE CONTROL KEY :
1 2
SWITCH 1 POWER ON or OFF
Controller with a separate power ON and OFF
3
DESTINATION : 1 thru 8 OUTPUT SELECTION
Press the destination button to select the output display channel.
4
FUNCTION
KEY
ALL
- function selection button
OFF
- function selection button
EDID
- function selection button
LOCK - function selection button
5
SOURCE : 1 thru 8 INPUT SOURCE SELECTION
Press input 1~8 sources with selection button
IR REMOTE CUSTOM AND DATA CODES (NEC Standard)
HOW TO SETUP IR CODES:
CUSTOM CODE : 09F6
ALL : 09F6 B04F
POWER ON : 09F6 A 15E
OFF : 09F6 B14E
POWER OFF : 09F6 A25D
EDID : 09F6 B748
LOCK
:
09F6
B54A
TV- # INPUT / AV - # OUTPUT
TV- # INPUT / AV - # OUTPUT
DESTINATION #1: 09F6 10EF
DESTINATION #8: 09F6 807F
DESTINATION #2: 09F6 20DF
SOURCE #1 : 09F6 01 FE
DESTINATION #3: 09F6 30CF
SOURCE #2 : 09F6 02FD
DESTINATION #4: 09F6 40BF
SOURCE #3 : 09F6 03FC
DESTINATION #5: 09F6 50AF
SOURCE #4 : 09F6 04FB
DESTINATION #6: 09F6 609F
SOURCE #5 : 09F6 05FA
DESTINATION #7: 09F6 708F
SOURCE #6 : 09F6 06F9
SOURCE
#7
:
09F6
07F8
SOURCE
#8
:
09F6
08F7
9