A-Star 2018 ED Installation Programming Troubleshooting - page 13
13
default setting is “Auto”.
3. Press UP ▲ or DOWN ▼ buttons to change the setting.
Press the SELECT button to set.
SET 97% FEATURE
By setting this feature to On, the unit will automatically recharge
when 97% capacity has been used, at any time of day.
1. Press and hold the SELECT button until the
display shows 000 - -.
2. Press the SELECT button twice to display the 97%
Feature screen. The default setting is “OFF”.
3. Press UP or DOWN buttons to change the setting.
Press the SELECT button to set.
SET 12 / 24 HOUR CLOCK
You can change clock display from 12 hour (AM & PM) or 24 hour
format.
1. Press and hold the SELECT button until the display shows
000 - -.
2. Press the SELECT button three times to display the Set
12 / 24 Hour Clock screen. The default setting is 24 Hour.
NOTE
: If 12 Hour clock is selected, be sure to observe
AM or PM when setting the time.
3. Press UP or DOWN buttons to change the setting.
Press the SELECT button to set.
SET ADJUSTABLE BACKWASH TIME
The timer can be changed to allow a different backwash time,
if so desired. The default setting is 4 minutes.
This can be adjusted from 1 to 60 minutes.
1. Press and hold the SELECT button until the display
shows 000 - -.
2. Press the SELECT button four times to display
“bA- 4”.
3. Use the UP ▲ or DOWN ▼ buttons to set the number of
minutes desired for backwash. Press the SELECT button to set.
SET ADJUSTABLE FAST RINSE TIME
The timer can be changed to allow a different fast
rinse time, if so desired. The default setting is 2
minutes. This can be adjusted from 1 to 60 minutes.
1. Press and hold the SELECT button until the display
shows 000 - -.
2. Press the SELECT button five times to display “Fr- 2”.
3. Use the UP ▲ or DOWN ▼ buttons to set the number of
minutes desired for fast rinse. Press the SELECT button to set.