AAMP of America iSimple Owner's Manual - 8. Hd Radio Operation
8
8. HD Radio Operation
(if equipped)
Entering Mode Select Menu
Press the “SAT” button. Immediately press the “▲” or “▼” button to cycle
through the Media Gateway sources. Once HD-FM or HD-AM is displayed
on the screen, wait 6 seconds and the radio will select the displayed
option.
PLEASE NOTE: If you are listening to Satellite Radio and wish to
switch the Media Gateway source, you must press the TUNE KNOB
twice before pressing the
▲ or ▼ button. If the radio still does not
go into the mode select menu, press and hold the TUNE KNOB until
the radio menu is displayed. Turn the TUNE KNOB until the radio
displays”SAT SCAN”. Press the TUNE KNOB to select. Now turn
the TUNE KNOB until “Channels” is highlighted. Press and hold
the TUNE KNOB to exit the radio menu. You should now be able to
access the mode select menu.
Seek Up
Press the ”>” button to seek up to next available station.
Seek Down
Press the ”<” button to seek down to the next available station.
Manually Tune
Turn the Tune knob to manually tune. Clockwise will tune up, Counter-
clockwise will tune down.
Storing stations into Preset memory
Press and hold the Preset button (1-6) where you want to store the preset.
“PR SAVED” will be displayed on the radio.
Recall a station from Preset memory
Press the preset button (1-6) to recall the station stored in that location.
Steering Wheel controls
Scroll up on the scroll wheel to cycle up through stations stored in preset
memory, scroll down, to cycle down. When the desired preset is displayed,
wait 3 seconds, the radio will auto select the station.