Summary of AAS
Page 1
2012/12/25 www.Aasalarm.Com aas gsm alarm system user manual.
Page 2
Table of contents luminous indicator signals ......................................................................................................................................... 2 testing sim cart with your cell phone first ..........................................................................
Page 3
Www.Aasalarm.Com 1.
Page 4: Luminous Indicator Signals
Www.Aasalarm.Com 2 luminous indicator signals system status light indicator system is powered on power light on (red) and steady system is in the armed state (away mode) away light on (red) and steady system is in the armed state ( home mode) home light on (red) and steady system is in disarmed stat...
Page 5: Activating Sensors
Www.Aasalarm.Com 3 activating sensors testing sim cart with your cell phone first the gsm alarm system requires a sim card to connect to the cellular network just as many mobile phones do [verizon and sprint do not use sim cards]. Sim cards may be purchased from any cellular company such as at&t or ...
Page 6
Www.Aasalarm.Com 4 setting up the sim card the sim card slides into the sim card holder located on the back of the keypad/controller. The pictures illustrate insertion of the sim card: powering up the keypad/control unit plug power cord into keypad unit receptacle, and then into ac power outlet. Thi...
Page 7: Signal Search Status
Www.Aasalarm.Com 5 signal search status insert and secure sim card in the card holder. ( sim card must be activated and has pre-paid minutes available). System search for wireless signal from the activated sim card gsm light flashes (red). Gsm light off if wireless sim card signal is unavailable or ...
Page 8
Www.Aasalarm.Com 6 activating wireless outdoor siren. Depress the keypad controller “ f4 ” button. Plug power cord of wireless outdoor siren into power receptacle and then into your wall outlet. Repeat this action until you hear “ short sound ”, and then you will hear “ long sound ” that indicating ...
Page 9
Www.Aasalarm.Com 7 changing the admin password. The admin password allows to program and operate the system enter the number below into your keypad/controller, you will hear a double beep sound to indicate that it has been changed. 【 default admin password (123456) 0 1 new admin password (must 6 dig...
Page 10
Www.Aasalarm.Com 8 activating your key fob remote. Push button 【 admin password 0 3 * 0 0 # 】 on keypad controller , and then push any of the four buttons on your key fob remote. You will hear two beeping sounds indicating that your remote control key fob is now activated. Activating your second key...
Page 11
Www.Aasalarm.Com 9 activating the door/window sensor for each door/window sensor, choose a number from 30 to 69 (notice: must 2 digits) , enter the number below into your keypad/controller. In the place of ( 30 to 69 ) , enter the number you have chosen for the sensor. After the pound sign (#),, you...
Page 12
Www.Aasalarm.Com 10 a ． to trigger the smoke detector, depress the clear plastic button on the face of the smoking detector. You will hear a double beep sound to indicate that it has been activated. B. To trigger the gas detector, depress the white plastic button on the face of the gas detector. You...
Page 13
Www.Aasalarm.Com 11 custom your security zones for security professionals (security system installers, monitoring company, retailer & reseller. Enter the codes below into the keypad/controller. 【 admin password 0 3 * ( 01 to 99 ) # 】 01 to 09 emergency zone: the above assigned id numbers are reserve...
Page 14: How Power Zone Works ?
Www.Aasalarm.Com 12 how power zone works ? The above illustration gives an example of how to use the power zone setting for pet-immune feature: you cat or dog might trigger motion sensor # 80, and yet they won't be able to trigger window sensor #80 or entry door sensor #80 within 1 minute apart. The...
Page 15
Www.Aasalarm.Com 13 the above illustration gives an example of how to use the power zone setting for home-arm feature: you or your family members might trigger # 80 motion sensor since you are moving around inside the house, and yet you won't trigger window sensor #80 or entry door sensor #80 within...
Page 16
Www.Aasalarm.Com 14 sample three: anti-false alarm function the above illustration gives an example of how to use the power zone setting for anti-false alarm feature: motion sensors sometime are triggered by the electric heater, or movement of your ceiling fan or even if the motion is facing direct ...
Page 17
Www.Aasalarm.Com 15 deactivating a sensor enter the number below into the keypad/controller. In the place of {01 to 99} enter the number you have chosen for the deactivating sensor. After the pound sign (#), you will hear a double beep sound indicating that it has been deactivated. 【 admin password ...
Page 18: Program Functions
Www.Aasalarm.Com 16 program functions setting the exit delay time/ arm delay model. This function allows you to activate your system while providing you with time to exit your premises without triggering the alarm system; you can adjust the delay time from zero ( 00 ) to thirty ( 99 ) seconds. Enter...
Page 19
Www.Aasalarm.Com 17 sirens confirmation when arm/disarm all activated sirens will blare when you arm and disarm the system using you keychain or your keypads. This feature is designed to confirm that the status of your alarm system is changed. You also have an option to switch this feature off to si...
Page 20
Www.Aasalarm.Com 18 programming stored phone numbers. To program your dialer with the phone numbers you want called when the alarm is triggered (up to six numbers), enter the number sequence below into your keypad. In place of the (enter phone number), enter the phone number that you want called whe...
Page 21: Operation
Www.Aasalarm.Com 19 operation arming function: all sensors active. Home arm function: all sensors active except motion detectors. Keypad/controller operation. To arm the alarm system: 【 password f1 】 to home arm the alarm system: 【 password f2 】 to disarm the alarm system: 【 password f3 】 for emerge...
Page 22
Www.Aasalarm.Com 20 change second entry keypad password. Press the follow button below on second entry keypad. 【 1 2 3 4 (factory password) new password (must 4 digits) # 】 operation. Arm : 【 password # 1 】 home arm: 【 password # 2 】 disarm: 【 password # 3 】 help: 【 password # 4 】 remote operation b...