AAS AAS User Manual - page 11
www.aasalarm.com
9
Activating the Door/Window Sensor
For each door/window sensor, choose a number from
30 to 69
(notice: must 2 digits)
,
Enter the number below into your
keypad/controller. In the place of
( 30 to 69 )
, enter the number you
have chosen for the sensor. after the pound sign (#),, you will need
to physically trigger the door/window sensor to activate it by bring
the magnetic bar and the sensor together and then separating them.
Activation will be confirmed by a
double beeping
sound. Each
door/window sensor has to be individually activated using this
procedure.
【
Admin Password 0 3 * (
30-69
)
#
】
Activating the Motion Detector / Pet Immune Motion Detector
For each motion detector you use choose a number from
10 to
29
(notice: must 2 digits)
,
Enter the number below into the keypad/controller. In the place of
{10
to 29}
enter the number you have chosen for the sensor. after the
pound sign (#), you will need to physically trigger the motion detector
to activate it. On the motion detector, switch the ON/OFF switch to the
on position. Secondly, physically move the motion detector about in
front of an object as the motion detector warms up; you will hear
a
double beep
sound indicating that it has been activated. Each
motion detector has to be individually activated using this procedure.
【
Admin Password 0 3 *
(
10-29)
#
】
Activating the Smoke Detector/Gas Detector/Glass Break Detector.
For each smoke detector/gas detector/glass break detector you use, choose a number from
01 to 09
(notice: must 2
digits)
.
Enter the number sequence below into the keypad/controller . In the place of In the place of {01 to 09}, enter
the number you have chosen for the sensor. After entering the pound sign (#), you will need to physically trigger the
smoking/gas detector/glass break detector to activate them. Activation will be confirmed by a
double beeping
sound,
【
Admin Password 0 3 * (
01-09
)
#
】