- DL manuals
- Aastra
- IP Phone
- 480I CT
- Administration Manual
Aastra 480I CT Administration Manual
Summary of 480I CT
Page 1
Model 480i ct administration guide release # 1.0
Page 2: Software License Agreement
Software license agreement aastra telecom inc., hereinafter known as "seller", grants to customer a per- sonal, worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use license to use software in object form solely with the equipment for which the software was intended. This...
Page 3: Table of Contents
Table of contents table of contents overview ......................................................................................................1 general requirements ............................................................................... 1 about this guide ..................................
Page 4: Overview
1 model / administration guide overview overview this sip 480i ct ip phone administration guide provides information on the basic network setup that is required for the sip 480i ct ip phone. It also includes details on the functioning and configuration of the 480i ct phone. General requirements • a ...
Page 5: Methods of Installation
Model / administration guide 2 methods of installation methods of installation the firmware set up and installation for the 480i ct can be done through the options list available directly from the phone or through the aastra 480i ct web client web interface. When the 480i ct is initialized for the f...
Page 6: 480I Ct Ip Phone Set Up
3 model / administration guide 480i ct ip phone set up the 480i ct’s options list 1. Press the £ button on the phone to enter the options list 2. Use the r and s to scroll through the list of options 3. Press the show softkey, the 4 button or press the number corresponding to the option to select an...
Page 7: 480I Ct Ip Phone Set Up
Model / administration guide 4 480i ct ip phone set up sip settings: if you have a proxy server or have a sip registrar present at a different location than the pbx server, the following settings may need to be changed: 1. Proxy ip this is the ip address of the proxy server. 2. Proxy port this is th...
Page 8: 480I Ct Ip Phone Set Up
5 model / administration guide 480i ct ip phone set up the aastra 480i ct web client to access the aastra 480i ct web client, open your web browser (supports internet explorer and gecko engine based browsers like firefox, mozilla or netscape) and enter the phone’s ip address into the address field, ...
Page 9: 480I Ct Ip Phone
Model / administration guide 6 480i ct ip phone configuration 480i ct ip phone configuration the network and sip options within the 480i ct phone can be configured from the phone or from the aastra 480i ct web client web interface. Administrator level options are password protected in both the phone...
Page 10: Setting Parameters Through
7 model / administration guide 480i ct ip phone configuration tftp server settings the 480i ct phone uses the tftp to download updates of the phone’s firmware and configuration files. You must set the tftp server address in the phone. From the 480i ct phone: 1. Press the £ button to enter the option...
Page 11: Setting Parameters
Model / administration guide 8 setting parameters – network settings setting parameters – network settings the following section contains the parameters to configure the network settings. Parameter – dhcp configurable through the 480i's options list, the aastra 480i ct web client or through the conf...
Page 12: Setting Parameters
9 model / administration guide setting parameters – network settings parameter – dns1 configurable through the 480i's options list, the aastra 480i ct web client or through the configuration files description primary domain name servers’ ip address. For any of the ip address settings on the 480i ct ...
Page 13: Setting Parameters
Model / administration guide 10 setting parameters – time server settings setting parameters – time server settings the following section contains the parameters to configure settings specific to the timeserver. Range not applicable example sip rtp port: 5130 parameter – time server disabled configu...
Page 14: Setting Parameters
11 model / administration guide setting parameters – time server settings parameter – time server3 configurable through the configuration files only description the tertiary time server's ip address. If the time server is enabled, and the primary and secondary time servers are not configured or cann...
Page 15: Setting Parameters
Model / administration guide 12 setting parameters – sip authentication setting parameters – sip authentication the following parameters are the settings specific to sip authentication. Parameter – sip proxy ip configurable through the 480i's options list, the aastra 480i ct web client or through th...
Page 16: Setting Parameters
13 model / administration guide setting parameters – sip authentication parameter – sip digit timeout configurable through the configuration files only description represents the time in seconds to configure the timeout between consecutive key presses. Format integer default value 4 range not applic...
Page 17: Setting Parameters
Model / administration guide 14 setting parameters – sip authentication parameter – sip linen password configurable through the configuration files. Configurations done through the 480i's options list or the aastra 480i ct web client affect the first line only. Description the password that will be ...
Page 18: Setting Parameters
15 model / administration guide setting parameters – sip authentication default value not applicable range n in the sip linen screen name ranges from 1 to 9 example sip line1 screen name: joe smith.
Page 19: Setting Parameters
Model / administration guide 16 setting parameters – softkey settings setting parameters – softkey settings this section contains the softkey parameters that can be configured on the 480i ct phone. There are eighteen softkeys that can be configured. These parameters can be configured either from the...
Page 20: Firmware Upgrade
17 model / administration guide firmware upgrade firmware upgrade the 480i ct phone uses a tftp server to download configuration files and firmware. The tftp server should be ready and be able to accept connec- tions anonymously (without a require- ment for a user name and password). See appendix b ...
Page 21: Troubleshooting
Model / administration guide 18 troubleshooting troubleshooting this section describes solutions to some most commonly occurring problems. Why does my phone display “application missing”? If you have experienced networking issues while the phone was downloading the application from the tftp server, ...
Page 22: Troubleshooting
19 model / administration guide troubleshooting 2. Select option 10. Phone status to enter the phone status options list. 3. Select option 4. Factory default. 4. Enter the administrator password and press the enter softkey. 5. Press the default softkey to restore the 480i ct to the factory’s default...
Page 23
Model / administration guide 20 appendix a: configuring the 480i ct at the aster- appendix a: configuring the 480i ct at the asterisk ip pbx the following configuration illustrates how to create a user with an extension to make and receive calls using the asterisk as the pbx. This configuration is d...
Page 24
21 model / administration guide appendix a: configuring the 480i ct at the aster- after this is defined in the “sip.Conf” file, some information has to be entered in the “extensions.Conf” file present in the same directory as the “sip.Conf” file. The following definition in the file under the [sip]s...
Page 25: Aastra.Cfg
Model / administration guide 22 appendix b: sample configuration files appendix b: sample configuration files this section consists of the sample configuration files necessary to configure the 480i ct phones. The general format is similar to configuration files used by several unix-based programs. A...
Page 26
23 model / administration guide appendix b: sample configuration files # dhcp setting # ============ dhcp: 1 # dhcp enabled. # dhcp: # 0 = false, means dhcp is disabled. # 1 = true, means dhcp is enabled. # notes: if dhcp is disabled, the following network settings will # have to be configured manua...
Page 27
Model / administration guide 24 appendix b: sample configuration files # sip registrar and proxy server settings # ======================================= #sip proxy ip: # ip of proxy server. #sip proxy port: 5060 # 5060 is set by default. #sip registrar ip: # ip of registrar. #sip registrar port: 5...
Page 28
25 model / administration guide appendix b: sample configuration files # softkey settings # ================ # softkeys can be set either server wide or unique to each phone. # setting softkeys as line/call appearances should be done in the # “.Cfg” file, since these are unique to each phone. # note...
Page 29
Model / administration guide 26 appendix b: sample configuration files softkey3 type: speeddial softkey3 label: “callfwdon” softkey3 value: *72 softkey4 type: speeddial softkey4 label: “callfwdoff” softkey4 value: *73 softkey5 type: speeddial softkey5 label: “dnd on” softkey5 value: *78 softkey6 typ...
Page 30: .Ctg
27 model / administration guide appendix b: sample configuration files .Ctg # generic sip sample configuration file # ===================================== # date: december 16th, 04 # file: sample “.Cfg” file # comments: # this file contains sample configurations for the “.Cfg” file. Please rename #...
Page 31
Model / administration guide 28 appendix b: sample configuration files # network settings # ================ #ip: # this value is unique to each phone on a server # and should be set in the “.Cfg” file if # setting this manually. #---------------------------------------------------------------------...
Page 32
29 model / administration guide appendix b: sample configuration files # explanation of settings with line 1 as example # ============================================== #sip line1 auth name: # sip registrar request authorization name. #sip line1 password: # sip registrar request passcode. #sip line1...
Page 33
Model / administration guide 30 appendix b: sample configuration files #sip line7 auth name: authname #sip line7 password: password #sip line7 user name: 5551231234 #sip line7 display name: joe smith #sip line7 screen name: joe smith #sip line8 auth name: authname #sip line8 password: password #sip ...
Page 34
31 model / administration guide appendix b: sample configuration files # softkey speed dials # =================== # for the default softkey speed dials, please refer to the sample # “aastra.Cfg” file. # example softkey line/call appearances # ===================================== #softkey1 type: li...
Page 35
Model / administration guide 32 appendix c: tftp server set-up appendix c: tftp server set-up there are a number of tftp servers available. Pumpkin is one of such tftp servers. Use the keywords “pumpkin tftp server” on google and you should get the web site where you can download the software from. ...
Page 36: Limited Warranty
33 model / administration guide limited warranty limited warranty aastra telecom warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, aastra telecom shall, at its option, and as the exclusive reme...